| Information |
|
|
 |
| Follow Us On |
|
|
| |
 |
| |
|
3M Marine Adhesive/Sealant 5200, 05203, 3 oz, White
|
|
|
| |
 |
3M Marine Adhesive/Sealant 5200, 05203, 3 oz, White
Use 3M 5200 on wood, fiberglass, hardware, motors, on fiberglass transoms, seams, joints, between struts, and planking stern joints. It is extremely permanent.
Check the bonding and sealing jobs 3M 5200 can handle for you: fiberglass deck to fiberglass hull, wood to fiberglass, portholes and deck fittings, motors on fiberglass transoms, under moldings, hull seams above and below water line, Center board trunk joints, between struts and planking, Stern joints, Deck housings, etc.
3M 5200 may be easily applied with a manual caulking gun. It will remain workable with trowel or spatula up to four hours after application, and won't sag or flow in vertical or horizontal seams.
This high performance polyurethane adhesive sealant becomes tack-free in 24-48 hours, and completely cures in 5-7 days with no shrinking. The seal is extremely strong, retaining its strength above or below the waterline. 5200 stays flexible and allows for structural movement. Stress caused by shock, vibration, swelling or shrinking is effectively absorbed.
| Product Details |
 |
| Manufacturer: |
3M |
| Product SKU: |
M05203 |
|
|
 |
 |
|
 |
 |
We Also Recommend: |
 |
|
|
| 3M Marine Adhesive/Sealant Fast Cure 5200, 05220, White, 3 oz. |
|
3M Marine Adhesive/Sealant Fast Cure 5200, 05220, White, 3 oz. The seal is extremely strong, retains its strength above or below the water line. Stays... |
| view more! |
|
| 3M Marine Adhesive/Sealant 5200 05205, 3 oz, Black |
|
3M Marine Adhesive/Sealant 5200 05205, 3 oz, Black Color - Black. The seal is extremely strong, retains its strength above or below the water line. St... |
| view more! |
|
| 3M Marine Adhesive/Sealant 5200, 05206, 1 fl oz, white |
|
Color - White. The seal is extremely strong, retains its strength above or below the water line. Stays flexible too - allows for structural movement. ... |
| view more! |
|
| |
|
|
|
|
|
|
Customers who bought this product also purchased... |
|
|
|
| Biocop TF Self-Polishing Bottom Paint, Gallon |
|
Biocop TF was developed as an alternative to tin-based antifouling paints to protect against the harshest marine environmen... |
| view more! |
|
| Barrier Coat Primer Gallon |
|
Barrier Coat Primer is a high build, chlorinated rubber based primer recommended for use over old copper based antifoulants prior to recoating. Also, ... |
| view more! |
|
| Silver Bullet Friction Reducing Coating |
|
Compare to Interlux VC 17! Silver Bullet is a fresh water friction reducing, low drag, high performance zinc based coating. Silver b... |
| view more! |
|
| 3M Marine Adhesive/Sealant 5200, 05206, 1 fl oz, white |
|
|
Color - White. The seal is extremely strong, retains its strength above or below the water line. Stays flexible too - allows for structural movement. ... |
| view more! |
|
| 3M Marine Adhesive/Sealant Fast Cure 4200, 05260, White |
|
3M Marine Adhesive/Sealant Fast Cure 4200, 05260, White Color - White. Bonds and seals fiberglass, gelcoat and wood. Ideal for rub-rails, stern-joints... |
| view more! |
|
| 3M Marine Adhesive/Sealant Fast Cure 4000UV, 05280, 3 oz, White |
|
3M Marine Adhesive/Sealant Fast Cure 4000UV, 05280, 3 oz, White Resistant to weathering, saltwater, and stresses caused by joint movement. Seals betwe... |
| view more! |
|
| |
|
|
|
|
|
|
|
