Log In | My Account |    0 item(s), Total: $0
Advanced Search
Home ::  Topside Boat Paint ::  Above or Below the Waterline ::  Aqueous Epoxy-Quart by Supermarine Paint
Categories
 


Specials & Promos

Enter your email to receive exclusive discounts!

Information

Follow Us On

Bottom Paint Store is upfront


Bottom Paint Store Coupons on tjoos.com
 
 
Aqueous Epoxy-Quart by Supermarine Paint
0 of 5 Stars
Aqueous Epoxy-Quart by Supermarine Paint
 
:
:
Size:
Quantity:
Price: $65.95
Sale Price: $60.78
 
 
Aqueous Epoxy rewrites the book on epoxy itself. It is the first single-stage water-based epoxy that is brushable and self-leveling. People are talking about it. Word on the dock is that it would self-level if applied with a push-broom! It offers spectacular leveling properties when brushed, rolled or sprayed. The finish is surprisingly smooth and soft in appearance yet rock-hard and durable. An excellent choice for use where spray restrictions are in place. Engineered to brush beautifully, build better and displace rust causing moisture and air as it cures making it acceptable for direct to metal applications Available in 90 colors and in gloss or satin. Colors, excluding white and clear, are considered custom and therefore non-returnable.

Note: Darker Colors and Safety Colors containing SC in the part number are an additional $15 which is displayed after choosing that color. Safety Colors containing MT in the part number are an additional $20 which is displayed after choosing that color.

Shipping: Ships within 2-4 days of order. 

  mono epoxy color chart



Product Details
Manufacturer: Supermarine Paint
Product SKU: SM-3000-Q
 


 

PHYSICAL CHARACTERISTICS

  • VISCOSITY: 70-72 k.u.
  • DRY TO TOUCH: 1 hour
  • WEIGHT SOLIDS: 58-61%
  • TACK FREE: 2 hours
  • VOLUME SOLIDS: 44-48%
  • TIME TO RECOAT: 4 hours
  • DRY HARD: 4 hours
  • V.O.C.: 98 grams per liter
  • COLOR RANGE: White and Tints
  • FLASH POINT: N/A
  • WEIGHT PER GALLON: 11.18 lbs. per gal. 
  • PRACTICAL COVERAGE: 250-275 sq. ft. per gallon 

THINNING: Thin if necessary with regular clean tap water.
CLEAN-UP: Tools and equipment may be cleaned with regular clean tap water.

 

Withstands high traffic, abrasions, impacts and chemicals. May be applied to existing paint in sound condition without primer. Requires a minimum of two interlinking coats to prevent rust on metal. Acceptable for brush, roller-coat or spray applications.

Brush: recommend natural bristle brushes.

Roller: Recommend high quality dense foam roller covers.

Spray: Recommend small-medium size tip. Dry to the touch in 1 hour, recoatable in 12 hours - temperature dependant. Dries hard in 12-24 hours. Sand between coats after 48 hours.

Mixing ratio: N/A. Pot life: N/A. Covers 250-275 square feet per gallon. See label and application directions for further information.

Recommendations: Recommend applying two or more coats to achieve a minimum DFT of 4 mils. Dilute with water only as needed. Not recommended for fiberglass or large wooden structures. Apply multiple coats as needed to achieve desired film build. Subsequent coats may be applied within twelve hours. For best results wait 12-24 hours between coats. Recoat within 48 hours or (lightly sand between coats).

SURFACE PREPARATION: Recommend SM-695 Etching Cleaner on steel, fiberglass, aluminum, concrete and plastic. Previously painted surfaces must be thoroughly cleaned and free of residues, oily film, and loose paint chips. Always wire brush, blast, sand or grind before priming or painting. Areas where all of the old coating has been removed must be spot primed before applying finish coat.

NEW SURFACES: Use only recommended primers: SM-7390 Formula 150 Epoxy Primer or SM-787 Mono Epoxy Primer or SM-664D Etching Primer.

Aluminum: Must be thoroughly cleaned with SM-695 Etching Cleaner, primed with SM-117 Pre-Wash Primer , use SM-664D Etching Primer as intermediate primer. Galvanized & Stainless Steel: Must be thoroughly cleaned, etched, primed with SM-117 Pre-Wash Primer in combination with SM-664D Primer or SM-787 Mono-Epoxy Primer.

Fiberglass: Bare fiberglass should be cleaned then sanded. Prime with SM-664D Etching Primer, or SM-7390 Formula 150 Epoxy Primer or SM-787 Mono Epoxy Primer.

Steel, iron & concrete: Clean thoroughly, sandblast, grind or wire brush. Recommend SM-695 Etching Cleaner. Where rust is evident use SM-5679 Rust Converting Cleaner. Then primer with SM-7390 Formula 150 Epoxy Primer or SM-787 Mono Epoxy Primer.  

Wood: Finish sand wood with 180-220 grit. Recommend SM-664D Etching Primer or SM-787 Mono Epoxy Primer or SM-7390 Formula 150 Epoxy Primer. Apply multiple coats as desired. Apply two or more coats over sealed surface.

For Fine Finishing: Remove all surface scratches. Begin with 100 or 220 grit sandpaper and finish off with 300 or 400 wet/dry paper. Remove all surface contaminants with Denatured Alcohol on a clean, lint-free cloth. DO NOT USE TACK CLOTHS CONTAINING OILS, WAXES OR SILICONES. If Oil Stain is Used to Color the Wood: Make sure that the stain has dried a minimum of eight hours before applying successive finishes. Lightly sand or buff be-tween coats with a good 220 grit sandpaper.

THINNING: Thin if necessary with regular clean tap water.
CLEAN-UP: Tools and equipment may be cleaned with regular clean tap water.

Slip Resistance: For added slip resistance add 8 ounces SM-630 Pro-Tex, 1 lb Tred-Tex or Gaco-Grip.

 
 
We Also Recommend:

Etching Cleaner Concentrate-SM695
Etching Cleaner Concentrate-SM695 Etching Cleaner Concentrate (SM-695) Excellent for use as a pre-paint cleaner. Cleans and removes rust, corrosion, oxidation, wax, grease, oil and sim...
view more!
Aqueous Epoxy-Gallon by Supermarine Paint
Aqueous Epoxy-Gallon by Supermarine Paint
Always Free Shipping
Aqueous Epoxy rewrites the book on epoxy itself. It is the first single-stage water-based epoxy that is brushable and self-leveling. People are talkin...
view more!
Supermarine Etching Primer
Supermarine Etching Primer Supermarine Etching Primer (SM-664D) is our best selling and most popular marine primer because of its versatility, outstanding sandability and protec...
view more!
 
Customers who bought this product also purchased...

AF-33 Self-Polishing Bottom Paint
AF-33 Self-Polishing Bottom Paint
Always Free Shipping
Self-Polishing Bottom Paint with Harder, More Durable Finish. Seahawk Paints AF-33has Multi-Season Performance at a Single Season...
view more!
2033 Reducer -Cool Weather by Sea Hawk Paints
2033 Reducer -Cool Weather by Sea Hawk Paints When temperature is below 85°, Sea Hawk 2033 Cool Weather Reduceris designed to flash quicker. Thisbottom paint reducermay be used in AF-33, Talon...
view more!
Mono Epoxy Primer-SM-787
Mono Epoxy Primer-SM-787 Shipping:Ships within 2-4 days of order.Supermarine Mono-Coat Epoxy Primer (SM-787) is a one of a kind single component oxygen cured epoxy primer that...
view more!
Gel Coat Repair Kit, 4oz
Gel Coat Repair Kit, 4oz
Always Free Shipping
Permanently repair nicks, gouges and scratches in fiberglass hulls and decks with this Evercoat Gel Coat Repair Kit. Blend coloring agents to achieve ...
view more!
Crystal Deck Cleaner by Tip Top Teak, Quart
Crystal Deck Cleaner by Tip Top Teak, Quart Crystal Deck Cleaner is just what you need to begin the restoration of your boat's teak. Designed for those large areas on your deck that have end...
view more!
Quick-Dry Synthetic Thinner for Supermarine Paint
Quick-Dry Synthetic Thinner for Supermarine Paint Quick-Dry Synthetic Thinner (SM-605) A proprietary formula that speeds the flash time. Use where recommended for best results. It thins, conditions an...
view more!
 
 
 
 
Copyright © 2014 BottomPaintStore.com. All rights reserved.
About Us   |   Contact Us   |   Wholesale Account   |   Shipping   |   Industry Links   |   No Sales Tax   |  Terms and Conditions   |   Shopping Cart   |   Site Map