Log In | My Account |    0 item(s), Total: $0
Advanced Search
Home ::  Topside Boat Paint ::  Awlgrip Marine Paint ::  Awlgrip Brightwork, Varnish, Interior Wood ::  AWLBRITE Clear Base J3005
Categories
 


Specials & Promos

Enter your email to receive exclusive discounts!

Information

Follow Us On

Bottom Paint Store is upfront


Bottom Paint Store Coupons on tjoos.com
 
 
AWLBRITE Clear Base J3005
0 of 5 Stars
AWLBRITE Clear Base J3005
 
:
Quantity:
Price: $104.58
Sale Price: $67.99
 
 
AWL-BRITE CLEAR is a buffable, high build, three component clear urethane for the Ultimate Brightwork System. AWL-BRITE CLEAR provides a far more durable finish than varnish alone, is faster curing and as easy to apply. Do not use below the waterline. Do not apply AWL-BRITE directly to bare wood.

Product Components, Reducers, Additives, and Auxiliary Components
Awlbrite Base ...............................................................................J3005
Awlbrite Converter ........................................................................J3006
Awlbrite Brushing Activator .............................................................A0031
Awlbrite Spray Activator ......................................................A0001, A0006
Equipment Cleaning ..................T0001, T0002, or T0003, or M.E.K.

The wood should be clean, dry, smooth, and well seasoned. Warning: Wood should have no more than 15% moisture content.

New / Bare Wood: AWL-BRITE should only be applied over properly prepared AWLSPAR (M3131) or AWL-SPAR H.S. (M3146) as part of the Ultimate Brightwork System. Do not apply AWL-BRITE directly to bare wood.

Old Finishes: Old finishes in good condition should be washed with AWL-PREP Surface Cleaner, then sanded with 220-320 grit paper to remove the gloss. Old finishes in poor condition should be removed. Test on a small area to make sure AWL-BRITE CLEAR doesn't attack the old finish. If old finish is attacked, it must be completely removed before applying the Ultimate Brightwork System.

Interior Applications: AWL-BRITE should only be applied over properly prepared AWL-SPAR (M3131) or AWL-SPAR H.S. (M3146), or QUIK-FIL (J3901/J3902). Do not apply AWL-BRITE directly to bare wood.

Note: Due to the wide variety of substrates, surface preparations, application methods and environments, customers should test the complete system for adhesion and compatibility under their conditions prior to full scale application.

Mixing and Reduction
Brush Awlbrite: AWL-BRITE CLEAR is a three component product. Mix by volume 2 parts J3005 with 1 part J3006 until one smooth, homogenous mixture is obtained. Then add part A0031. Overall mix is 2:1: by volume. Example: 4 oz. J3005, 2 oz. J3006, 1 oz. A0031. Additional A0031 can be added if desired, but standard 2:1: ratio is required.
Spray Awlbrite: Mix by volume 2 parts J3005 with 1 part J3006 until one smooth, homogenous mix is obtained. Then add - 1 part A0001 (standard) or A0006 (cool temperatures) Activator.
Mix and use small quantities of AWL-BRITE CLEAR at a time. Keep the original containers closed when not in use. Do not shake AWLBRITE CLEAR. Do not use Pro-Cure Accelerators.
Induction Time after Mixing: None Anticipated Pot Life at 77F(25C), 50% R.H: 1 to 2 Hours

Application Instructions
General: The key to performance of any varnish system is applying enough material. This is especially true with AWL-BRITE CLEAR Urethane. These directions call for more coats than are needed to achieve basic cosmetic qualities. If you stop the system when it looks good, or sand excessively, you will not achieve the desired performance. Apply light, smooth coats. Apply two coats in an 8 hour period. Allow to cure 8-12 hours or overnight and repeat. Ten coats are recommended.

Sand as little as possible. Sanding is only required when:
Runs, sags or brush marks need to be leveled.
Dirt or grit needs to be removed from the surface.
If it has been more than 36 hours since the last application.

If no leveling is required, but it has been more than 36 hours since the last application; dulling the surface with Scotchbrite? Pads is recommended, see the application guide for systems. If possible, avoid applying or curing the material in direct sunlight. Do not apply or attempt to cure AWL-BRITE CLEAR below 65F (18C ) or over 95F (35C).

CLICK HERE for Additional Technical Data, MSDS, and Application Guidelines for Awlbrite!



Product Details
Manufacturer: Awlgrip
Product SKU: AWL-J3005
 


 
 
 
 
We Also Recommend:

AWL-BRITE Clear Reducer A0031
AWL-BRITE Clear Reducer A0031
Always Free Shipping
MIX RATIO: AWL-BRITE PLUS is a three component product. Mix by volume 2 parts J3005 with 1 part J3006 until one smooth, homogenous mixture is obtained...
view more!
AWLBRITE Converter J3006
AWLBRITE Converter J3006 Awl-Brite Clear is a high build, three component, acrylic urethane clear wood finish which offers a durable finish for prepared wood. For above waterl...
view more!
 
Customers who bought this product also purchased...

AWL-CAT #2 Standard Spray Converter G3010 PT
AWL-CAT #2 Standard Spray Converter G3010 PT AwlCat #2 Standard Spray Converter is to be used with Awlgrip when spraying only or with AwlCraft 2000.Awlgrip: Ratio 1:1, Mix in a one-part converter...
view more!
AWL-CAT #3 Brushing H3002 PT
AWL-CAT #3 Brushing H3002 PT
Always Free Shipping
Awlgrip AwlCat #3 Brushing Converter is to be used with AWLGRIP ONLY when brushing or rolling.Mixed in a one-part converter to two parts color base ratio.
view more!
AwlGrip Topcoat Dark Gray G1344
AwlGrip Topcoat Dark Gray G1344 Awlgrip Topcoat is a polyester based high gloss polyurethane topcoat giving long lasting gloss and color retention. AwlGrip Topcoat Dark Gray G1344 ma...
view more!
1/2" Chip Brush (Disposable)
1/2 This dispoable chip brush has a varnish flat trim natural wood handle,white chinese bristle withsteel ferrule.
view more!
1-1/2" Chip Brush (Disposable)
1-1/2 This dispoable chip brush has a varnish flat trim natural wood handle,white chinese bristle withsteel ferrule.
view more!
3M Marine Adh/Seal Fast Cure 4000UV, 06580, 1/10 GL, White
3M Marine Adh/Seal Fast Cure 4000UV, 06580, 1/10 GL, White 3M Marine Adhesive/Sealant Fast Cure 4000UV, 06580, 1/10 Gal, White Resistant to weathering, saltwater, and stresses caused by joint movement. Seals b...
view more!
 
 
 
 
Copyright © 2014 BottomPaintStore.com. All rights reserved.
About Us   |   Contact Us   |   Wholesale Account   |   Shipping   |   Industry Links   |   No Sales Tax   |  Terms and Conditions   |   Shopping Cart   |   Site Map