Tag Archives: best foul release coating

PropOne Vs. PropGlide

It is widely accepted that a build up of marine life on the surface of a boat’s propeller and drive shaft negatively impacts engine efficiency and performance. Even if the prop has a thin layer of growth on it’s surface area, fuel efficiency is reduced by a significant amount. To counter this problem, engineers have turned to developing “super-slick” coatings. When the drive is engaged, and the prop begins to move, any organisms attempting to adhere to the prop simply slide right off! No chemicals are used to poison or kill the organisms in the environment.

How do PropOne* and PropGlide compare?

Which coating gives you the most bang for your buck?

PropGlide is much newer to the market than PropOne, but has been in development for over ten years. Being new to the slick coating market, PropGlide appears to be able to avoid slipping into the same ruts that their competitors have. The biggest obstacle for PropOne is the cost. Comparing the two products at price point, PropGlide is about 30% less expensive and offers 25% more product. That’s 2 strikes for PropOne right off the bat. PropOne is available in the following sizes: 1000mL, 500mL, and 250mL. On the other hand PropGlide offers a size larger than PropOne’s 1000mL and still manages a lower cost. Also PropGlide offers a size smaller than PropOne’s 250mL for sailboat owners who don’t need the larger quantities of product. (For more information on choosing the right size of PropGlide, see this Coverage Chart.)

In terms of performance, both slick coatings are equally good. They do the job and do it well. It is too early to say which product will outlast the other in the minds of consumers. But for right now, we recommend PropGlide as opposed to PropOne. The savings alone makes PropGlide worth every penny.

 

 

 

 

*PropOne was formerly known as PropGold. It is essentially the same product, just a different brand name.

**This PropOne review and PropGlide review is the sole opinion of BottomPaintStore.com

***Above PropOne prices and PropGlide Prices are based on internet web search December 2016.

Propspeed Vs. PropGlide

Propspeed ReviewFoul Release Systems Like Propspeed and PropGlide provide the best solution to keeping growth of your props and running gear. While these are not antifouling prop paints, they do keep the growth off buy creating a super slippery surface that the marine growth cannot stick to. Propspeed recommends that their kits by applied by a professional Propspeed applicator. On the other hand, PropGlide is available for any DIY applicator and is 30%+ less and more product for the money. If you want to apply this yourself, be sure to follow the details in the respective application manuals.   You can find these on any of the Propeller Foul Release Kit listed on our website.
PropGlide is newer to the market, but been in development for over ten years, while Propspeed  has been available for many years and is the leading brand name in the market place. The biggest issue with Propspeed is the cost. Very expensive!  PropGlide is also expensive but 30% less than Propspeed. In addition, you get 25% more product with PropGlide , so be sure to get the right size. You might be able to use a smaller size kit with PropGlide  which could then save you over 50%! You can find the comparison on PropGlide’s web site: Propspeed Compared

Performance of both coatings has been comparable, with much fewer complaints about PropGlide   Either they are just newer in the market with less complaints, or they truly have improved performance. Time will tell. At this point we recommend trying PropGlide  as a Propspeed alternative – since there is comparable performance with Propspeed, the cost savings alone is worth it! And PropGlide offers a sailboat size kit making it affordable now for sailboat owners.

This Propspeed review and PropGlide review is the sole opinion of BottomPaintStore.com

Above Propspeed prices and PropGlide Prices are based on internet web search October 2016 .