Wood Finish Matte, the companion product to Wood Finish Gloss, offers a no sanding solution in a matte finish. Its a one-component varnish alternative based on a urethane alkyd resins and tung oil and contains U.V. absorbers. Specifically formulated for oily woods like teak and iroco, Epifanes Wood Finish Matted looks its best when applied over multiple coats of Wood Finish Gloss, Epifanes Clear Gloss Varnish or Epifanes Polyurethane Clear Gloss. Its finish is a rich matte with a clear amber color and has the appearance of being hand-rubbed. It offers superior flow and durability and excellent scratch resistant and exterior weather resistance. No sanding between coats applies if recoated within 72 hours. Otherwise a light sanding is required. Sold by the 1000ml (1 quart) can.
Product Details
Manufacturer:
Epifanes
Product SKU:
EPI-WFM.1000
Container Size: 1000ml.
Color: Opaque in the can, dries clear amber
Gloss: Matte (Some Sheen)
Density: 0.95 kg./liter
Solids Content : 40 +/- 2 vol. %
Drying times at 65F / 65% RH: Tack free - 1 hours / Tape free - 24 hours, Dry - 12 hours / Recoatable - 12 hours
Recommended Film Thickness: Per coat wet - 60 micron / Per coat dry - 25 micron
Epifanes Wood Finish Matte Application: Brush, roller, conventional air spray, H.V.L.P.
Temperature should be between 50 degrees F and 85 degrees F with the air humidity below 85 percent. Avoid varnishing in too much wind or sun. A rapid loss of solvents will occur under these conditions and will decrease the flowing ability. Add thinners up to the specified percentage to compensate for the faster release of solvents. Any existing finish much be intact, degreased and sanded prior to recoating. Before applying each coat, degrease the surface with Epifanes Spray Thinner or Denatured alcohol. Use a tack cloth to remove dust particles prior to application. Always stir Epifanes Wood Finish Matte before using. Failure to do so may result in an uneven or blotchy finish. Some settling of the formulation may occur upon long standing.
We Also Recommend:
Epifanes Rubbed Effect Interior Varnish 1000ml
A one-component interior varnish based on urethane alkyd resins, gives a rich clear amber satin finish. For maximum durability, clarity and depth, app...
A pure distilled white spirit for thinning all Epifanes one-part paints and varnishes. Epifanes Brush Thinner is sold by the 1000ml (1 quart) can. See...
Wood Finish Gloss is the ultimate varnish alternative without sanding. It is based on phenolic-modified resins and tung oil with microscopic porosity ...
Designed primarily as a flow enhancer, Epifanes Easy-Flow may also be used as a wood sealer or rust inhibitor. Easy-Flow, based on a selection of natu...
Known around the world, Epifanes Clear Varnish Gloss, is considered the ultimate in a high gloss finish. This traditional marine varnish is based on t...
A fast evaporating solvent for spray applications of all Epifanes one-part paints and varnishes. The fast evaporating feature of this varnish thinner ...
Customers who bought this product also purchased...
Epifanes Spray Thinner
A fast evaporating solvent for spray applications of all Epifanes one-part paints and varnishes. The fast evaporating feature of this varnish thinner ...
Wood Finish Gloss is the ultimate varnish alternative without sanding. It is based on phenolic-modified resins and tung oil with microscopic porosity ...
A pure distilled white spirit for thinning all Epifanes one-part paints and varnishes. Epifanes Brush Thinner is sold by the 1000ml (1 quart) can. See...
