Products used with gel coat application and gelcoat repair. Coloring tints, Wax additive sanding aid, MeK P catalyst and Mold Release Agents for Gelcoat.
Displaying 1 to 12 (of 12 products)
Wax N Grease Killer Solvent Wash
Every new fiberglass hull produced is released from the mold by a mold release wax. In order to obtain proper adhesion of paint, the wax and other for...
Use this product as a surfacing agent when using Sea Hawk Gel Coat with wax additive . Partall Film #10 is a polyvinyl alcohol (PVA) water/alcohol sol...
Patch Booster is an additive that significantly improves the application, appearance and longevity of gelcoat patches. Not a conventional thinner or s...
Used as the hardener (activator) in Gel Coats and Resins. .5 OZ(14.78cc) is recommended for 1 Quart of Gel Coat or Resin. 2OZ(40.00cc) is recommended ...
Styrene Monomer, used as a thinner in gelcoats and resins to aid in application. Will not cause yellowing of gelcoat and is the preferred thinner/redu...
Webbing Solution is a clear liquid added to gel coat to obtain spatter or cobweb effects. It is mixed with a gel coat of one color, and sprayed onto a...
Non-Skid is an additive that can be added to most paints and gel coats to provide a slip resistant surface.This non skid additive is available in two ...
Metal Flakes for Gel Coats. When the metallic flakes are mixed with Gelcoat it produces a metallic finish. Available sizes of metallic flakes are 1oz ...
Patch Booster is an additive that significantly improves the application, appearance and longevity of gelcoat patches. Not a conventional thinner or s...
Used as a sanding aid in Gel Coats. Wax additive should be added before catalyzing with MEK p. Wax additives are to be added to the finish coat of gel...
.gif "Coloring Agents for Gel Coats and Resins")
