Mixing and Reduction
For spray application, add 8-10 oz. (227-284 grams) by weight of GRIPTEX Non-Skid Particles to each gallon (3.785 liters) of mixed color base and converter.
Application Instructions
GRIPTEX Non-Skid Particles may be added to mixed topcoats and applied by spray. The dry particles can be broadcast or sprinkled into a tacky paint film.
Do not apply paint materials to surfaces warmer than 105F (41C) or colder than 55F (13C). Do not attempt to cure products at temperatures below 55F (13C).
Product Details
Manufacturer:
Awlgrip
Product SKU:
AWL-73012/1QT
We Also Recommend:
GRIPTEX Non-Skid-Fine Grit 73012 GL
Griptex is a polymer bead aggregate used to provide non skid deck and step areas when mixed with an Awlgrip topcoat. Type: Polymer BeadColor: Transluc...
Customers who bought this product also purchased...
Awlcraft 2000 Oyster White F8222 GL
Awlcraft 2000 is a fast drying, acrylic urethane high gloss topcoat for an easy-to-apply, high gloss finish. This Product MUST be sprayed. Not for use...
Awlgrip High Build Epoxy Primer-Yellow Base D9002Q
High Build Epoxy Primer is an epoxy surfacer used where high build and filling is required. For above waterline use only.Product Components, Reducers,...
Awlgrip Topcoat is a polyester based high gloss polyurethane topcoat giving long lasting gloss and color retention. AwlGrip Topcoat Medium GrayG1007 m...
Awlgrip Deluxe Tack Rags (4 cloths per pack) 73009
Tack rags are used just before painting to remove the lightest dust or dirt from what would otherwise be considered a clean, ready to paint surface.Ta...
.jpg "Awlgrip High Build Epoxy Primer Converter, D3002, GL")
