Jabsco blowers are primarily intended for intermittent duty cycles such as evacuating fuel vapors from bilge areas. If desired, they also may be used for other general air circulation applications with longer duty cycles. However, when doing so, it should be noted that the maximum motor life is approximately 1000 hours. Therefore, the blower should only be used for applications if this length of service is acceptable.
Features:
Tough Reinforced Plastic Housing
Mount to any surface
Slip-On Inlet and Outlet Ducting Connection
Efficient High Volume Air Flow
Low Current Draw
Corrosion-Resistant Materials Throughout
N.M.M.A. Type Accepted
Meets USCG Regulation 183.410 and ISO 8846 MARINE for Ignition Protection
Customers who bought this product also purchased...
Wax N Grease Killer Solvent Wash
Every new fiberglass hull produced is released from the mold by a mold release wax. In order to obtain proper adhesion of paint, the wax and other for...
Premium Marine Grade White Gel Coat has great cosmetic and protective life expectancy and will keep your hull shining like new for years. Sea Hawk whi...
3M Finesse-it Marine Paste Compound 06039 White, 1 gal
Well suited for boat reconditioning of heavily oxidized surfaces/finishes and removing P800 sand scratches on production gelcoat and grade 1000 or 120...
Styrene Monomer, used as a thinner in gelcoats and resins to aid in application. Will not cause yellowing of gelcoat and is the preferred thinner/redu...
G830 2.0 HVLP Gelcoat and Resin Touch-up Spray Gun
HVLP touch-up gelcoat gun is perfect for touch-up of finished composite products and for mold repair. This high quality HVLP gelcoat gun has no flat s...
