Rule Automatic bilge pumps eliminate the need for a separate float switch to activate the pump. Once power is supplied, starting and stopping is completely automatic. The pump checks for water every 2 + minutes by turning on for a second and measuring load against the impeller. If water is present, the pump remains on until the water is removed. Thereafter the pump resumes its 2-1/2 minute check cycle. The automatic pumps feature two positive leads: an automatic (brown) and a manual override (brown with a white stripe).
Gallons Per Hour = 800 | Gallons Per Minute = NONE | Operation = Automatic | Outlet Size = 3/4" | Power - Max Continuous (Amps) = 2.8 amps | Volts = 12v
We Also Recommend:
Rule 1100 G.P.H. Automatic Bilge Pump
Rule 1100The Rule 1100 offers impressive pumping power for its size and cost. Competitive models in this pumping range are much larger and far more ex...