The NEW eco-friendly Rule Mate series of Bilge pumps feature a solid state water sensing technology that eliminates the need for a separate float switch.
When water enters the bilge and reaches a certain height (2-3/4 inches) a sensor turns the pump on. After the water is pumped out, another sensor shuts the pump off.
The sensor's unique "field effect" technology is programmed to recognize the dielectric constant of water only. In the event of an onboard oil spill, straight motor oil that enters the bilge will not turn the pump on. It's part of Rule's continuing commitment to preserving our waterway.
The new Rule Mates are available in 500, 750 and 1100 GPH models. Rule has been building bilge pumps for 30-years. The pumps are preferred by yachtsmen and commercial fishermen the world over.
All-in-one pump & switch - No float switch required
Pump turns on when water level rises & shuts off when water is removed
Will not pump oil - Straight motor oil will not turn pump on
Snap-off strainer for easy cleaning
Limited three year warranty
Amp Draw: 3.4 amp
Fuse Size: 5.0 amp
Height: 4.5 inches
Width: 5 Inches
Gallons Per Hour = 1100 | Operation = Automatic | Outlet Size = 1 1/8" | Power - Max Continuous (Amps) = NONE | Volts = 12v | Gallons Per Minute = NONE
We Also Recommend:
Rule 1500 G.P.H. Bilge Pump
Rule 1500High pumping capacity and reliability at a lower cost. The Rule 1500 offers more pumping capacity and more exclusive design features than any...