Log In | My Account |    0 item(s), Total: $0
Advanced Search
Home ::  Teak Oil and Wood Restoration ::  Sikkens Cetol Marine ::  Sikkens Cetol Marine Gloss
Categories
 


Specials & Promos

Enter your email to receive exclusive discounts!

Information

Follow Us On

Bottom Paint Store is upfront


Bottom Paint Store Coupons on tjoos.com
 
 
Sikkens Cetol Marine Gloss
0 of 5 Stars
Sikkens Cetol Marine Gloss
 
Size:
Quantity:
Price: $59.99
Sale Price: $34.99
 
 
Cetol® Marine Gloss with Next Wave™ UV-absorbing technology is a durable clear gloss protective wood finish, developed as a topcoat for Cetol Marine, Cetol Marine Light and Cetol Marine Natural Teak.  Next Wave technology is the next generation of Cetol Marine from Sikkens with a unique UV-absorbing package, which is specialty resins and advanced UV absorbers that provide greater protection, durability and longevity.  Cetol Marine Gloss provides a high gloss, hard wearing, UV protection and an easy to clean finish.  It can be used where a gloss appearance is preferred on top of Cetol Marine, Cetol Marine Light and Cetol Marine Natural Teak.  Do not use on decks.

 



Product Details
Manufacturer: Interlux
Product SKU: INT-IVA315
 


 

Preparation Cetol® Marine Gloss is a gloss topcoat that can only be applied on top of a minimum of 2 coats of Cetol® Marine, Cetol® Marine Light or Cetol® Marine Natural Teak.
Method The wood moisture content should be below 18%. Apply liberally using a long-haired bristle
brush, smoothly, in the direction of the grain. Keep a wet edge to prevent lap marks and thoroughly saturate end grains where possible. Apply 2-3 coats of Cetol® Marine Gloss. Always allow 24 hours drying time in between coats. Sanding between coats is not recommended as this will result in a reduction of dry film thickness. Recommended film thickness must be applied to ensure effective product performance. Apply all coats within 1-2 weeks.

Make regular inspections to all coated areas. Problem areas should be attended to immediately
and maintenance coats should be routinely applied. If the coating is allowed to weather beyond
the regular maintenance period of 1 year, returning this surface to excellent condition will be more difficult. Before application of a maintenance coat of Cetol® Marine Gloss, clean the surface with Interlux® All Purpose Boat Soap to remove any surface contaminants as per instructions on label. If blue fungi or mildew are present then they can be treated with Interlux Premium Teak Restorer with a nylon scruffing pad as per instructions on label. Rinse with fresh water and allow to dry. Sand lightly with 220-320 (grade) grit paper. After sanding, wipe with Interlux Special Thinner 216 and let to dry thoroughly prior to the application of the maintenance coat of Cetol® Marine Gloss. Cetol® Gloss is not suitable for use on immersed areas.

Hints

Mixing Stir thoroughly before use.
Thinner Do not thin.
Cleaner Special Thinner 216.
Ventilation and Humidity Control Ensure adequate ventilation during use.
Airless Spray Not recommended.
Roller Not recommended.
Other Before applying any Cetol® product, prepare a 2-3 coat test sample on your wood to
confirm desired color results. To achieve optimal color results always use the same Cetol® product initially applied when overcoating or applying maintenance coats. Some Important Points If Cetol® Marine Gloss is spilled on gelcoat, remove immediately. Difficult stains may be removed from gelcoat with Interlux Fiberglass Solvent Wash 202. Do not allow excess Fiberglass Solvent Wash 202 to remain on gelcoat. For painted surfaces ONLY use Interlux Special Thinner 216. Do not allow excess Special Thinner 216 to remain on painted surfaces. Do not apply at temperatures within 3°C of dew poin t or in wet weather. Substrate temperature should be minimum 10°C/50°F and maximum 35°C/95°F. Ambient temperature should be minimum 10°C/50°F and maximum 35°C/95°F. Product tem perature should be no less than 10° C/50°F and maximum 35°C/95°F. Avoid painting in dire ct sunlight.
Compatibility/Substrates Suitable for use on all types of wood including oily timbers such as Teak.
Number of Coats 2-3 as per specification.
Coverage (Theoretical) - 305.3 (ft²/Gal) - up to 400 ft²/gal (10 m²/lt) per coat. On new wood the coverage of the first coat will be lower as Cetol® Marine Gloss will penetrate the wood.
(Practical) - Dependant upon the surface roughness and conditions of application.
Recommended DFT 0.6 mils dry to 20 microns dry.
Recommended WFT 1.2 mils wet to 40 microns wet.
Application Methods Brush

 
 
 
We Also Recommend:

Interlux Fiberglass Solvent Wash 202
Interlux Fiberglass Solvent Wash 202 Interlux Fiberglass Solvent Wash 202 removes mold release agents, wax, oil and grease from hulls of bare fiberglass boats. It is also effective in rem...
view more!
Interlux Special Thinner 216
Interlux Special Thinner 216 Interlux 216 Special Thinner is a fast evaporating solvent which, when added to specified paint coatings, improves drying in cold climates and facili...
view more!
 
Customers who bought this product also purchased...

Duraglas Fiberglass Filler, 24035, 1 gallon
Duraglas Fiberglass Filler, 24035, 1 gallon Duraglas is the original, premium all-purpose reinforced marine polyester filler.Features:- Repairs holes, tears and cracks on fiberglass, wood and me...
view more!
3M Marine Adhesive/Sealant 5200, 06502, 1/10 Gallon, Mahogany
3M Marine Adhesive/Sealant 5200, 06502, 1/10 Gallon, Mahogany 3M Marine Adhesive/Sealant 5200, 06502, 1/10 Gallon, Mahogany Color - Mahogany. The seal is extremely strong, retains its strength above or below the ...
view more!
Duraglas Fiberglass Filler, 24035, 1 Quart
Duraglas Fiberglass Filler, 24035, 1 Quart Duraglas is the original, premium all-purpose reinforced marine polyester filler.Features:- Repairs holes, tears and cracks on fiberglass, wood and me...
view more!
West System 105 Epoxy Resin
West System 105 Epoxy Resin
Always Free Shipping
105 Epoxy Resin® is the base material on which all West System 105 System epoxy compounds are built. The resin is a clear, pale yellow, low-viscos...
view more!
West System 300 Mini Pump Set
West System 300 Mini Pump Set 300 Mini Pumps are designed for convenient and accurate metering of all Group Size A, B and C WEST SYSTEM resin and hardeners. They mount directly on ...
view more!
West System 206 Slow Hardener
West System 206 Slow Hardener 206 Slow Hardener® is a low-viscosity epoxy curing agent for use when extended working and cure time is needed or to provide adequate working time...
view more!
 
 
 
 
Copyright © 2014 BottomPaintStore.com. All rights reserved.
About Us   |   Contact Us   |   Wholesale Account   |   Shipping   |   Industry Links   |   No Sales Tax   |  Terms and Conditions   |   Shopping Cart   |   Site Map