Styrene Monomer, used as a thinner in gelcoats and resins to aid in application. Will not cause yellowing of gelcoat and is the preferred thinner/reducer to acetone when using with resins and gelcoats.
NOTE: Generally you should not thin resin or gelcoat more than 10%.
Product Details
Manufacturer:
No Manufacturer
Product SKU:
FBCI-Styrene
We Also Recommend:
Gelcoat, White Premium Gallon by Seahawk Paints
Premium Marine Grade White Gel Coat has great cosmetic and protective life expectancy and will keep your hull shining like new for years. Sea Hawk whi...
Premium Marine Grade White Gel Coat has great cosmetic and protective life expectancy and will keep your hull shining like new for years. Sea Hawk whi...
Customers who bought this product also purchased...
Marine Vinyl Ester Resin, Quart
In terms of physical properties and cost Sea Hawk Vinyl Ester Resin is a compromise between low-cost polyesters and epoxy resins. Its use is limited t...
Designed to remove minor scratches and light oxidation while producing a high-gloss wet look finish on fiberglass and painted boats. Product contains no wax or silicone. A premium gelcoat polish by 3M
3M Marine Adhesive/Sealant 5200 05205, 3 oz, Black
3M Marine Adhesive/Sealant 5200 05205, 3 oz, Black Color - Black. The seal is extremely strong, retains its strength above or below the water line. St...
Fiberglass Cloth Tape, woven with non-raveling edge for glassing seams, chines, keels, bulkheads and inside/outside joints of rectangular shapes. Use ...
Accelerator/Hardener (SM-160) An optional accelerator/hardener for use with SM-1000 Revolution and SM-2020 Mono Epoxy color coatings and clears. When ...
406 Colloidal Silica is a thickening additive used to control the viscosity of the epoxy and prevent epoxy runoff in vertical and overhead joints. 406...
