Log In | My Account |    0 item(s), Total: $0

Call Now Toll-Free
888-505-2313

Advanced Search
Home ::  Boat Bottom Paint ::  Sea Hawk Paints ::  Tropikote Hard Bottom Paint
Categories
 


Specials & Promos

Enter your email to receive exclusive discounts!

Information

Follow Us On

Bottom Paint Store is upfront


Bottom Paint Store Coupons on tjoos.com
 
 
Tropikote Hard Bottom Paint
0 of 5 Stars
Tropikote Hard Bottom Paint
 
:
:
Quantity:
Price: $79.95
Sale Price: $70.99
 
 

 Tropikote 2145 Black  Tropikote 2140 Dark Blue Tropikote 2142 Blue  Tropikote 2141 Red  Tropikote 2143 Green 
Hard epoxy based antifoulant with over 75.8% copper in EVERY color. Designed to aggressively combat growth in any water condition, Its compatibility with all properly prepared hard bottom paints permits safe overcoating without fear of lifting.

  • 75.8% Copper in EVERY color.
  • Highest Quality Grade of Cuprous Oxide Available (More Potent Active Ingredient)
  • Highest Copper Content in the Industry (75.8% in ALL Colors)
  • Better Color Consistency for Color Matching (Less Shading Issues)
  • Better Flow and Rolling Ability in Every Gallon
  • May Be Applied Over Competitive Modified Epoxy Antifoulant Paints.

Information:

  • California Approved: Yes
  • Compare To: Trinidad, Trinidad 75, Ultrakote
  • Copper: 75.8% In ALL Colors Available
  • Reducer: Sea Hawk 2033 Thinner or 2035
  • Warranty: Yes ! One-year Against Barnacle Growth

Helpful Tips: 

How Much Bottom Paint Do You Need? 

Bottom Paint Calculator   

 Bottom Paint Calculator


Product Details
Manufacturer: Sea Hawk Paints
Product SKU: SH-2100
 


 

Sea Hawk Paints Tropikote Technical Data Sheet

Sea Hawk Paints Tropikote Safety Data Sheet

Sea Hawk Paints Tropikote Product Information
Colors: Black 2145, Dark Blue 2140, Blue 2142, Red 2141, Green 2143
Finish/Sheen: Semi-Gloss
Copper Content: 75.8% (all Colors)
Volume Solids: 60% +\- 2%
Shipping Weight: 24 Lbs./Gal.
Flash Point: 100° F
VOC: 288 Grams/Liter
Typical Film Thickness:
Pleasure Craft: 3.0 mils dry film thickness (DFT) per coat, (5.0 mils wet film thickness (WFT))
Commercial Marine: 4.0-5.0 mils DFT per coat by spray application (6.7- 8.0 Mils WFT)
Recommended Coats: 2 coats on entire hull and 3 at waterline and other high wear areas
Theoretical Coverage: 320 Sq.Ft./Gal. @ 3.0 mils DFT 

Application Data
Mixing: Tropikote antifouling paint con-tains a high concentration of copper and may have settled in transit. Product must be thoroughly mixed with power mixer/shaker until uniform.
Induction Time: Not Applicable
Thinning: If necessary, maximum 10% Sea Hawk 2033 Thinner, 2035
Cleaning Sea Hawk 2033 Thinner, 2035, Xylene
Pot Life: Not Applicable
Brush/Rolling: Solvent Resistant Roller Cover 3/8" pile (nap), smooth to medium. Prewash roller cover to remove loose fibers prior to use.
Airless Spray: Minimum 33:1-2 GPM ratio pump; "0.017-0.026" orifice tip; 3/8" ID high-pressure material hose; 90 PSI line pressure; 60 mesh filter.
Conventional Spray:
Please contact your Sea Hawk representative for more specific information.
Safety: Prior to use, obtain and consult the "Material Safety Data Sheet" of this product for health and safety information. Read and observe all precautionary notices on container labels. 

 
Surface Preparation
Paint only clean, dry surfaces. Remove all grease, oil, wax, or other foreign material by solvent or detergent washing. (SSPC-SPI). Use Sea Hawk Wax N Grease Killer Solvent Wash
Compatibility: For pleasure craft applications, please refer to our Sea Hawk Compati-bility Chart to ensure compatibility when applying Tropikote antifouling paint over exist-ing bottom paint.
Previously Painted Surfaces: Tropikote is suitable for this substrate. For correct procedures please refer to the Application Guidelines for Fiberglass/Gelcoat.
Fiberglass or Vinyl Ester Hulls: Tropikote is suitable for this substrate. For correct procedures please refer to the Application Guidelines for Fiberglass/Gelcoat.
Wood Surfaces: New Work - Sand the wood surface with 80 grit sandpaper, remove the sanding dust with Sea Hawk S-90 Cleaner, allow to dry and apply the first coat of Tropikote bottom paint. Reduce the first coat (only) 20% with Sea Hawk 2033 Thinner to maximize surface penetration. Next, apply whatever seam compound if needed, al-low to dry in accordance with the product label and apply two more coats of Tropikote without any Thinner reduction.
Aluminum: Tropikote Antifouling paint is not recommended on an aluminum hull.
Steel Vessels: Sea Hawk Tropikote antifouling paint is normally used as part of a paint system for underwater hull areas on steel vessels. Nominally, Tropikote is applied over a properly cleaned existing surface of another antifouling paint or sealer. The surface must be clean and dry prior to application, free of all surface contamination. We highly recommend the hull bottom be high pressure water washed immediately upon haul out with 2,500-3,000 psi clean fresh water. Some areas may need to be cleaned in accor-dance with SSPC-SP-1 Solvent Cleaning to ensure all oils, grease, and other contami-nants are removed. Please refer to additional data below and the section on recom-mended systems for steel below.
Additional Data For Painting Steel Hulls: If the surface to be painted is also to be repaired with an epoxy primer system, we recommend the area first be grit blasted to SSPC-SP-10 „near white metal‟, cleaned free of dust and blast media and primed in ac-cordance with the primer system specifications. Please refer to the specified primer data sheet for application details. Make sure the first coat is applied within the proper over coating window of the last coat of epoxy primer which is normally while the epoxy is still tacky but cannot be removed
 
 
We Also Recommend:

Wax N Grease Killer Solvent Wash
Wax N Grease Killer Solvent Wash Every new fiberglass hull produced is released from the mold by a mold release wax. In order to obtain proper adhesion of paint, the wax and other for...
view more!
Bottom Painter Kit - Deluxe
Bottom Painter Kit - Deluxe Bottom Paint Deluxe contains the application products you need for a bottom job The Deluxe Kit Includes: 1 - 9" Metal Tray 2 - 9" Plastic Tr...
view more!
Biocop TF Pint Paint Additive
Biocop TF Pint Paint Additive
Always Free Shipping
If you desire the ultimate in antifoulant performance, then add one Sea Hawk Biocop TF Pint to every gallon of bottom paint. Biocop TF Pint is an bott...
view more!
Sharkskin Hard Bottom Paint
Sharkskin Hard Bottom Paint
Always Free Shipping
Sharkskin is Sea Hawk's traditional 45.2% copper-based hard modified epoxy paint. Sharkskin aggressively combats all types of...
view more!
Tropikote Biocide Plus Hard Bottom Paint
Tropikote Biocide Plus Hard Bottom Paint
Always Free Shipping
          Tropikote Biocide with Slime Resistance is a hard protective paint which produces the most durable finish for long lasting p...
view more!
2033 Reducer -Cool Weather by Sea Hawk Paints
2033 Reducer -Cool Weather by Sea Hawk Paints When temperature is below 85°, Sea Hawk 2033 Cool Weather Reduceris designed to flash quicker. Thisbottom paint reducermay be used in AF-33, Talon...
view more!
 
Customers who bought this product also purchased...

Sandless Primer (GL)
Sandless Primer (GL) Sandless Primer Used in Place of Sanding Bare Fiberglass.It is designed for use on a new fiberglass hull when sanding is prohibited by manufacturer. I...
view more!
Wax N Grease Killer Solvent Wash
Wax N Grease Killer Solvent Wash Every new fiberglass hull produced is released from the mold by a mold release wax. In order to obtain proper adhesion of paint, the wax and other for...
view more!
Black Gelcoat
Black Gelcoat
Always Free Shipping
Sea Hawk Black Gel Coat that is marine grade and easy to apply for the Do-It-Yourselfer, and superior leveling and air release for the professional. T...
view more!
Coloring Agents for Gel Coats and Resins
Coloring Agents for Gel Coats and Resins Tinting Colors for Gel Coats and Resins can be used to change the color of your boat's gel coat! These smo...
view more!
Awlgrip Deluxe Tack Rags (4 cloths per pack) 73009
Awlgrip Deluxe Tack Rags  (4 cloths per pack) 73009 Tack rags are used just before painting to remove the lightest dust or dirt from what would otherwise be considered a clean, ready to paint surface.Ta...
view more!
AwlFair L.W. Converter D7200, Quart
AwlFair L.W. Converter D7200, Quart
Always Free Shipping
Awlfair Converter D7200, used with Awfair L.W. 8200. Size: Quart. Mixing ratio 1:1
view more!
 
 
 
 
Copyright © 2015 BottomPaintStore.com. All rights reserved.
About Us   |   Contact Us   |   Wholesale Account   |   Shipping   |   Industry Links   |   No Sales Tax   |  Terms and Conditions   |   Shopping Cart   |   Site Map