Monthly Archives: March 2021

Using a Signal Coat Indicator for Repainting Ablative Antifouling Paint

Anti-fouling paint is a type of underwater hull paint, also known as bottom paint. These specialized coatings are designed for the exterior of the hull of a ship or boat, and combat the growth, as wells as, the detachment of underwater organisms, such as seaweed, algae and barnacles. These aquatic life forms bind to the hull and impact a vessel’s performance and longevity.

Anti-fouling paints are often applied as one component of a multi-layering process which can have other benefits in addition to their antifouling properties, such as acting as a barrier against corrosion on metal hulls that will degrade and weaken the metal, or to improve the flow of water past the hull of a boat or yacht.

Boaters recognized early on it is important to keep the bottom of their craft free of barnacles due to loss of speed and performance. The key is knowing when to pull your boat out of the water for a new bottom paint application. Ablative paints are typically reapplied every 1–3 years. One way to ensure you reapply your ablative antifouling paint when it’s needed is by adding a signal coat or flag coat.

To apply a signal/flag coat, when you are getting multiple coats of ablative bottom paint applied to your hull, make the first coat a different color. For example, if the bottom is going to be painted blue, make the first coat red. When the blue paint wears off and you see the red flag coat, it is time to repaint.

ablative bottom paint
Aquaguard is an excellent antifouling bottom paint

If you need further assistance with your boat painting project feel free to contact our technical team Monday-Friday 8:30-5:00 pm EST.

Antifouling Paint for Inflatable Boats

Be sure to apply a water based ablative antifouling paint to your inflatable boat

Inflatable boats have become very popular due to their flexibility and variety of uses. If your inflatable-bottom dinghy stays in the water for long periods of time and you have decided to apply antifouling paint you have a few options. You’ll want to apply a water based ablative antifouling such as Monterey by Sea Hawk, one quart is enough for two coats on an 8-10′ boat. Avoid a copper based paint on aluminum. Before application clean the area with a maroon Scotchbrite pad for good adhesion. These paints tend to be flexible and adhere well to PVC and Hypalon but since they are ablative they can easily rub off so be careful when storing your dinghy on deck or deflating it for longer storage to protect surrounding areas from paint.

Monterey Bottom Paint

If you need further assistance with your inflatable boat paint project do not hesitate to contact our technical team Monday-Friday 8:30-5:00pm EST.

Using Webbing Solution

Webbing Solution is a clear liquid added to gelcoat to obtain spatter or cobweb effects. It is mixed with a gelcoat of one color, and sprayed onto a contrasting colored surface.

Decorative effects produced by the webbing mixture will vary, and relate directly to techniques or gun adjustments. A fine hairline spider web pattern results from plenty of air and scanty material flow. Coarse and splotchy patterns are created by fuller material flow and decreased air volume. While our webbing solution is only tested with gelcoat, customers do use with paint achieving similar results.

The manufacturer suggests on the initial coat you add the wax and while gelcoat is still tacky, before it comes to a full air cure, you apply the contrast color of webbing (which should have the wax added too).

If you are applying webbing over fully cured gelcoat, sand with 150 grip, clean with acetone and then apply the webbing.

Mix 2 parts gelcoat to 1 part webbing.
Mix proper amount MEK-P for the amount of gelcoat.
Shoot at 10 to 12 PSI.

Add to colored gelcoat to obtain desired webbing effect. Test in an inconspicuous area to determine satisfactory results