T0001 can only be used with AWLGRIP and AWLCRAFT 2000 in a spraying application when a fast drying time is desired. Use T0001 in AWLGRIP/AWLCRAFT 2000 Topcoats when application and cure temperatures are between 60F to 70F (16C to 21C) and 80F to 90F (27C to 32C). At 60F to 70F (16C to 21C), T0001 will keep the paint film open for good flow but evaporate fast enough to provide adequate dry and dust-free times. At higher temperatures, the solvency of Awlgrip T0001 helps maximize atomization. Its fast evaporation rate allows the solvent to exit the film before skinning occurs, avoiding solvent entrapment or solvent "pop".
T0001 is usually used in Awlgrip and Awlcraft 2000 Topcoats.
High Build Epoxy Primer is an epoxy surfacer used where high build and filling is required. For above waterline use only.Product Components, Reducers,...
Awlgrip Topcoat is a polyester based high gloss polyurethane topcoat giving long lasting gloss and color retention. AwlGrip Topcoat Pearl Gray G1008 m...
Awlgrip Topcoat is a polyester based high gloss polyurethane topcoat giving long lasting gloss and color retention. AwlGrip Topcoat Federal Yellow G92...
AwlCat #2 Standard Spray Converter is to be used with Awlgrip when spraying only or with AwlCraft 2000.Awlgrip: Ratio 1:1, Mix in a one-part converter...
Awlcraft 2000 is a fast drying, acrylic urethane high gloss topcoat for an easy-to-apply, high gloss finish. This Product MUST be sprayed. Not for use...
.jpg "Awlgrip High Build Epoxy Primer Converter, D3002, QT")
