| Information |
|
|
 |
| Follow Us On |
|
|
| |
 |
| |
|
Duralux Topside Marine Enamel, High Gloss, Quart
|
|
|
| |
 |
A single package topside alkyd enamel for use on primed steel and metal, wood, aluminum, or fiberglass. Originally developed for pleasure and commercial boats, the properties of this marine enamel make it also ideal for onshore or offshore oilfield equipment, farm machinery, and plant maintenance operations. Duralux Marine Enamels withstand repeated washings, resists oil and gasoline, and hold up to the discoloration effects of harbor gases.
Available Marine Enamel Colors:
|
White
|
Black
|
Navy Gray
|
Biloxi Blue
|
Tile Red
|
Unit Rig Gray
|
 |
 |
 |
 |
 |
 |
|
Signal Red
|
Haze Gray
|
Lafitte Green
|
Int. Orange
|
Alpine Green
|
Aquamarine
|
 |
 |
 |
 |
|
|
|
Cruiser Blue
|
Signal Yellow
|
National Blue
|
Signal Green
|
Gulf Blue
|
|
 |
 |
 |
 |
 |
|
| Product Details |
 |
| Manufacturer: |
Duralux Marine Paints |
| Product SKU: |
DUR-7XXQT |
|
|
 |
 |
|
 |
|
PRODUCT DATA:
Type: Alkyd Enamel
Sheen: High Gloss
Package Viscosity @ 77* F: 68-72 Kreb Units
Weight per Gallon (U.S.): 9.72
% Solids by Weight: 63%
% Solids by Volume: 46%
Recommended Dry Film Thickness: 1-1.5 Mils
Method of Application: Brush, Roller or Spray
Application Viscosity @ 77* F: 70 Kreb Units
Theoretical Spreading Rate @ 1Mil DFT: 400-500 square feet per Gallon
VOC: Maximum 3.8 # per Gallon
Dry Time: To touch - 4 hours, Recoat - overnight
Thinner/Cleaner: M650 Paint Thinner
Reduction Ratio: None required, but if spraying use no more than 10 %
Flash Point: 100* F T.O.C
Duralux Marine Enamel MSDS
|
|
|
|
|
|
DIRECTIONS FOR USE:
SURFACE PREPARATION: The surface must be dry and free of grease,
wax, dirt, or other foreign matter. Scrape off all loose paint and dull
any gloss area with a light sanding or power brushing. Remove all dust
with a cloth dampened with paint thinner and allow to dry.
APPLICATION:
Unpainted Surfaces:
Steel: On clean, rust free steel, apply two coats of Duralux Zinc Chromate M739 apply two coats of Duralux Marine Enamel.
Aluminum: Pretreat with suitable wash primer. Apply one coat of Duralux Zinc Chromate M739, Top with two full coats of Duralux Marine Enamel.
Fiberglass: Wipe down with Acetone prior to sanding and after sanding. Top with two full coats of Duralux Marine Enamel.
Steel: Clean all bare areas to bright steel. Touch up with two coats of Duralux Zinc Chromate Primer M739. Top with two full coats of Duralux Marine Enamel.
Fiberglass: Wipe down with Acetone prior to sanding and after sanding. Top with two full coats of Duralux Enamel.
THINNING: Duralux is made for use as it comes from the can. If thinning is desired, Use no more than one-half pint of Paint Thinner M650 per gallon. For spraying, use one-half pint to one pint per gallon.
COVERAGE: On properly prepared surfaces, expect to cover from 400-500 square feet per. gallon.
DRYING TIME: Four hours, hut slightly longer on damp or cold days. Allow 12-16 hours for thorough hardening before repainting.
|
|
|
|
|
 |
We Also Recommend: |
 |
|
|
| Non-Skid Additive for Duralux Marine Paints |
|
Non-Skid additive that can be added to Duralux Marine Paints, including camouflage paints, and marine enamels and most paints to provide a slip resist... |
| view more! |
|
| Duralux Yacht Primer, Quart |
|
Duralux Yacht Primer is made specifically to seal new pre-primed yacht finishes. Its fast drying property allows two-coat work in one day. Use of this... |
| view more! |
|
| Duralux Topside Marine Enamel, High Gloss, Gallon |
|
A single package topside alkyd enamel for use on primed steel and metal, wood, aluminum, or fiberglass. Originally developed for pleasure and commerci... |
| view more! |
|
| Duralux Paint Thinner 650M, Quart |
|
Duralux Paint Thinner 650M is used in Duralux Enamels, Camouflage Paints, and Duralux Yacht Primer. Duraluxproductsare made for use as they comes from... |
| view more! |
|
| Duralux ZinKromate Performance Primer, Quart |
|
|
Duralux ZinKromate Performance Primer is a high quality synthetic primer for use in light to moderate marine exposures. It is lead and chromate free b... |
| view more! |
|
|
| |
|
|
|
|
|
|
Customers who bought this product also purchased... |
|
|
|
| 3M Marine Fiberglass Restorer and Wax, 09006, 32 oz |
|
Designed to remove HEAVY oxidation, chalking, fading, minor scratches, rust and exhaust stains; plus provide protection on fiberglass/gelcoat. Liquid.... |
| view more! |
|
| Evercoat Fiberglass Repair Kit, 8oz Kit |
|
Use for Automotive, marine, and Household RepairsThe Evercoat Fiberglass Repair Kits is best for repair of fiberglass and metal surfaces. Will rebuild... |
| view more! |
|
| Acetone, by Sea Hawk Paints |
|
Acetone used for paint application, thinning and clean up. Please check the product you are using for the recommended clean up and thinning solvent. A... |
| view more! |
|
| Barrier Coat Primer Gallon |
|
Barrier Coat Primer is a high build, chlorinated rubber based primer recommended for use over old copper based antifoulants prior to recoating. Also, ... |
| view more! |
|
| Biocop TF Self-Polishing Bottom Paint, Gallon |
|
Biocop TF was developed as an alternative to tin-based antifouling paints to protect against the harshest marine environmen... |
| view more! |
|
| Supermarine Etching Primer |
|
Supermarine Etching Primer (SM-664D) is our best selling and most popular marine primer because of its versatility, outstanding sandability and protec... |
| view more! |
|
| |
|
|
|
|
|
|
|
