403 Microfibers, a fine fiber blend, is used as a thickening additive with resin/hardener to create a multi-purpose adhesive, especially for bonding wood. Epoxy thickened with microfibers has good gap-filling qualities while retaining excellent wetting/penetrating capability.
406 Colloidal Silica is a thickening additive used to control the viscosity of the epoxy and prevent epoxy runoff in vertical and overhead joints. 406...
This strong, wood-toned filler is good for use in glue joints and fillets on naturally finished wood. It mixes easily with epoxy and lets you create f...
407 Low-Density filler is a blended microballoon-based filler used to make fairing putties that are easy to sand or carve. Reasonably strong on a stre...
404 High-Density filler is a thickening additive developed for maximum physical properties in hardware bonding where high-cyclic loads are anticipated...
Customers who bought this product also purchased...
Fiberglass Chopped Strand Mat 1.5 OZ x 50" Wide
Fiberglass Mat also known as Chopped Strand Mat (CSM) is a non-woven material typically used for laminate build-up and repair work. Fiberglass Mat con...
3M Spreader Assortment, 05844, 1 each 4 inch, 5 inch, and 6 inch
Designed for spreading body and fiberglass fillers, finishing putties and resins. Have sharp edges, are flexible, durable, easy to clean and cured filler pops off easily.
Aerosol contact adhesive designed for bonding vinyl tops, heavyweight liners and hood silencer pads where high strength and heat resistance are needed.
Strong, Long-life rollers made with deep grooves and thin fins provide excellent air release. Patented handle, rubber modified polpropylene design pro...
Fiberglass Cloth 8 oz medium weight and strength cloth. Used commonly in boat building/repair applications. Good formability and easy wet out. Use wit...
