Pettit Trinidad® XSR, Triple Biocide, Gallon
- $27.88
- Availability:In Stock
- Brand: Pettit Marine Paint
- Product Code: PET-1X90/GL
Finish: Flat
Solids by Weight: 73 +/- 2%
Solids by Volume: 54 +/- 2%
Coverage: 435 ft2/gal.
VOC: 330 grams/liter (max)
Biocides:
- Copper Thiocyanate 15%
- ECONEA® 6%
- Zinc Pyrithione 6%
Flash Point: 98°F (SETA)
Application Method: Brush, roller, airless or conventional spray
Maximum Roller Thickness: 3/8”
Number of Coats: 2
Wet Film Thickness: 3.6 mils
Dry Film Thickness: 2 mils
Application Temp: 50° F. Min. / 90°F. Max.
Thinner: 120 Brushing Thinner
Dry Time*: (hours)
To Recoat To Launch
90°F 2 4
70°F 4 8
50°F 8 16
*The above dry times are minimums. Trinidad XSR Antifouling may be recoated after the minimum time shown and launched up to 60 days after painting.
Pettit Trinidad XSR Product Data Sheet
Pettit Trinidad XSR Product Data Sheet
Trinidad XSR is heavily loaded with multiple biocides. As a result, there is a tendency for settling to occur, especially if the paint has been on the shelf for several months. It is necessary to thoroughly mix the paint before using. If possible, shake the can of paint on a mechanical paint shaker. Before using, check the sides and bottom of the can to make sure all the pigment has been mixed in. If mixing is going to be done with a wooden paddle or an electric drill mixer, pour off half of the liquid from the top of the can into another can and then properly mix in any settled pigment; then remix the two parts together thoroughly. Adhere to all application instructions, precautions, conditions, and limitations to obtain optimum performance. Refer to individual labels and tech sheets for detailed instructions when using associated products, etc. When spraying, do not thin Trinidad XSR more than 10% (12 ounces per gallon) or inadequate paint film thickness will occur, and premature erosion of the finish will be likely. Do not apply Trinidad XSR in thick films as poor adhesion may result.
Extremely Effective Triple Biocide Hard Antifouling Paint
- Trinidad XSR is certified by Lloyd's Register
- Three biocides provide unparalleled multi-season protection in the harshest environments
- Maximum protection against all types of marine growth
- Can be hauled and re-launched without losing effectiveness
- Scrubbable and durable finish
- Covered by HD (Hull Defense) 24 Month Limited Warranty
- Colors Available: Black, Red, Blue (Please note Red and Blue colors are non-stock and require 1 week lead time and a minimum order of 2 gallons)
Trinidad® XSR is an Extremely Effective Triple Biocide Hard Antifouling Paint and is the NEW standard by which hard bottom paints are measured. Trinidad XSR delivers exceptional, tri-biocide performance by combining the highest levels of Copper Thiocyanate, ECONEA® and Zinc Pyrithione in the industry. This combination makes Trinidad XSR effective against all types of fouling while significantly reducing the overall environmental impact through less copper. Trinidad XSR not only reduces the amount of copper used, but provides significantly better performance overall through new biocide technology.
Trinidad XSR does not require movement and works equally as well at the dock or underway. Its durable, hard finish has excellent adhesion and is highly abrasion resistant, which also means it can be hauled and re-launched without losing effectiveness. Left in the water, Trinidad XSR will provide years of dependable service.
Trinidad XSR provides excellent antifouling protection backed up by the industry’s strongest Warranty. HD (Hull Defense 24 Month Limited Warranty) offers peace of mind to any boater in every harbor. Trinidad XSR offers the most dependable and trusted hard antifouling paint to every boater and applicator in the industry.
Key Features:
- Fast-Dry Technology
- High copper load offers excellent performance in all conditions
- Excellent adhesion to fiberglass, wood, and steel hulls
- Hard, durable, finish for long-lasting performance
- 53% Copper
Don't forget to check the Pettit Bottom Paint Compatibility Chart!
*This Item Ships From South Florida – Click to See Estimated Transit Times
Related Products
Pettit Protect High Build Epoxy Primer, Gallon Kit
Pettit Protect High Build Epoxy Primer is a heavy-duty, two-component epoxy coating for use where maximum resist.....
Pettit Rustlok Steel Primer 6980
Pettit 6980 Rustlok is a one package moisture cured polyurethane coating designed for application over any steel or cast iron.....
Pettit Tie Coat Primer 6627
6627 Tie Coat Primer is a general purpose chlorinated rubber type product used as a primer on metal surfaces and as a tie coa.....
Aluma Protect Epoxy Primer Kit, Gallon
Pettit’s Aluma Protect 4400/4401 is a 2 part strontium chromate primer designed to form the ideal barrier coat over roughed b.....
Premium HRT, by Pettit
Pettit Premium HRT multi-season high copper antifouling uses the latest technology available to create a hybrid paint film st.....
Unepoxy HRT, by Pettit
Pettit Unepoxy HRT seasonal antifouling uses the latest technology available to create a hybrid paint film strong enough to h.....
Odyssey® Triton, by Pettit
Odyssey® Triton delivers exceptional, multi-season, tri-biocide performance by combining the proven reliability of Copper Thi.....
Interlux Ultra Kote, Gallon
Ultra-Kote is a hard, durable, high performance antifouling paint for use in moderate to severe fouling areas. Designed for m.....
Pettit Bio-Blue® Hull Surface Prep 92
Bio-Blue® Hull Surface Prep 92 is a powerful blend of cleaning agents and silica grit that dewaxes, etches, cleans, and prep.....
Pettit Protect High Build Epoxy Primer, Quart Kit
Pettit Protect High Build Epoxy Primer is a heavy-duty, two-component epoxy coating for use where maximum resist.....