Instructions:
Remove oil, paints, and waxes from all surfaces by cleaning and sanding thoroughly. To activate the Superbond Epoxy Glue, mix in the following proportion at temperature above 60 F.
Place equal amounts of Part A and Part B (by Volume) on a flat non-porous surface and mix thoroughly for about one minute.
Est. Pot Life: 8 - 10 Mins. @ 77F 1/2 lb. mass.
Use mixed amount within 30 minutes. Let cure 24 hours before placing into operation (based on 77 F)
A blend of 1 part #A and 2 parts of #B will produce a more flexible compound for caulking decks and window embedments.
Superbond FAST Epoxy Glue may be used to repair tanks, pipes, windshields, floors, fiberglass, aluminum boats, concrete and styrofoam. Superbond Fast Epoxy Glue, when cured, is not affected by gasoline, oils or salt water.
- PERFECT Two Part Epoxy Adhesive To Join 2 Pieces Of Wood To Make A Larger Plane, Concrete Crack Filler, Join Plastic To Plastic, Or Even Metal To Metal!
- WATER, CHEMICAL AND SOLVENT RESISTANT!
- Concrete Block Bonding Adhesive, Best Adhesive For Metal, Panel Bonding Adhesive, Best Adhesive For Plastic, Epoxy Tile Adhesive, Wood Adhesives & More!
- No Matter What You Are Trying To Bond, Superbond Is A Relentless Bond Waterproof Adhesive!
- 100% MADE IN USA!
- With an endless amount of applications, SuperBond is THE LAST ADHESIVE YOU’LL NEED TO BUY!
- Metal
- Concrete
- Masonry
- Molding
- Tiles
- Block Walls, repair tanks, pipes, windshields, floors, fiberglass, aluminum boats, concrete, and styrofoam.
Sizes:
- Quart Kit (Part A: Pint + Part B: Pint)
- ½ Gallon Kit (Part A: Quart + Part B: Quart)
- 2 Gallon Kit (Part A: Gallon + Part B: Gallon)
