VC Performance Epoxy, 2 Gallon Kit
- $244.88
- Availability:Out Of Stock
- Brand: Interlux
- Product Code: INT-V127KIT/2
Color: White
Finish: Semi-Gloss
Specific Gravity: 1.07
Volume Solids: 45%
Mix Ratio: 1:1 by volume (as supplied)
Converter/Curing Agent: V128
Typical Shelf Life: 2 yrs
VOC (As Supplied): 550 g/lt
Dry Times: Refer to Technical Data Sheet
Mixing: Mix base and curing agent thoroughly at the specified ratio. Allow 45 mins at 50°F/10°C and 30 mins above 77°F/25°C for induction.
Thinner: Spray Reducer 2316N
Thinning: Thin, if necessary, after induction.
Cleaner: Fiberglass Solvent Wash 202
Airless Spray Pressure: 142-170 bar/2100-2500 psi Tip Size: 0.48-0.53 mm/19-21 thou.
Conventional Spray: Pressure Pot: Pressure: 3.44-4.08 bar/50-60 psi -gun pressure; 8-15 psi pot pressure. Tip Size: 1.4-1.5 mm/55-60 thou. Siphon Cup: Pressure: 3.06-4.08 bar/45-60 psi. Tip Size: 1.4-1.5 mm/55-60 thou.
Other: If fairing is necessary, use Interprotect Watertite between 1st and 2nd coats of VC Performance Epoxy and then apply 3 coats of VC Performance Epoxy over the Interprotect Watertite.
Click this link to view Technical Data Sheet
Click this link to view Product SDS
Prepare the surface
Bare Fiberglass: Begin by scrubbing well using soap and water and a stiff brush. Rinse with fresh water. Wipe with Fiberglass Solvent Wash 202. Sand with 80 grade (grit) paper. Wipe with Fiberglass Solvent Wash 202.
Clear Epoxy: Begin by scrubbing well using soap and water and a stiff brush. Rinse with fresh water. Wet sand with 80 grade (grit) paper. Wash down with fresh water. Wipe with Fiberglass Solvent Wash 202.
Bare Metal: Sandblast or grind to bright metal finish. Immediately apply Viny-Lux Primewash 353/354 thinned 25% with Viny-Lux Solvent 355. Allow to dry for 1-24 hours.
Application
Applying: Apply 3 coats of VC Performance Epoxy. VC Performance Epoxy is designed for spray application but can be applied by brush and rollers.
Airless Spray Pressure: 142-170 bar/2100-2500 psi Tip Size: 0.48-0.53 mm/19-21 thou.
Conventional Spray: Pressure Pot: Pressure: 3.44-4.08 bar/50-60 psi -gun pressure; 8-15 psi pot pressure. Tip Size: 1.4-1.5 mm/55-60 thou. Siphon Cup: Pressure: 3.06-4.08 bar/45-60 psi. Tip Size: 1.4-1.5 mm/55-60 thou.
Mixing: Mix base and curing agent thoroughly at the specified ratio. Allow 45 mins at 50°F/10°C and 30 mins above 77°F/25°C for induction.
Thinner: Spray Reducer 2316N
Thinning: Thin, if necessary, after induction.
Number of Coats: 3-4 as needed
Coverage: (Theoretical) -199.9 ft²/gal by spray
Recommended DFT per coat: 3.6 mils dry
Compatibility: VC Performance Epoxy can be applied to gelcoat, bare fiberglass, epoxy and properly primed metal. Apply to clean, dry, properly prepared surfaces only. VC Performance Epoxy can only be applied over two component products that are specified for underwater use. If there is any single paint (such as antifouling paint) on the surface, it must be removed and then proceed as with bare surface.
**Important: Product temperature should be minimum 10°C/50°F and maximum 29°C/85°F. Ambient temperature should be minimum 10°C/50°F and maximum 35°C/95°F. Substrate temperature should be minimum 10°C/50°F and maximum 35°C/95°F. Exposure to air and extremes of temperature should be avoided. For the full shelf life of VC Performance Epoxy to be realised ensure that between use the container is firmly closed and the temperature is between 5°C/41°F and 35°C/95°F.Keep out of direct sunlight.
VC Performance Epoxy has no antifouling or foul release properties.
- Smooth, low-friction surface ideal for racing
- Hard, abrasion resistant coating
- Can be applied spray with a roller and brush
Related Products
Pettit Black Widow Racing Antifouling, Black
Black Widow is the slickest, fastest, ultra-smooth, burnishable racing finish available. Its powerful dual biocides provide m.....
Aluma Protect Epoxy Primer Kit, Gallon
Pettit’s Aluma Protect 4400/4401 is a 2 part strontium chromate primer designed to form the ideal barrier coat over roughed b.....
Pettit Black Widow Racing Antifouling, Dark Blue
Black Widow is the slickest, fastest, ultra-smooth, burnishable racing finish available. Its powerful dualbiocides provide mu.....