Interlux Primocon, 16 oz Aerosol, Gray
- $114.88
- Availability:In Stock
- Brand: Interlux
- Product Code: INT-YPA985/16
Color: YPA985N
Finish: Matte
Specific Gravity: 0.78
Volume Solids: 31%
Typical Shelf Life: 2 yrs
Unit Size: 300 ml (16 oz)
Preparation
FACTORY PAINTED SURFACES: Sand with 80 grade (grit) paper. Remove sanding residue.
PREVIOUSLY PAINTED SURFACES: Sand with 80 grade (grit) paper. Remove sanding residue.
BARE ALUMINUM
Method: Shake can well, listening for mixing ball. Continue shaking for at least 1 minute. Hold can 12-16 inches from the unit when applying the paint. Between coats turn can upside and spray until the spray is clear to clean the nozzle.
Hints: Other Use an entire can of Primocon Aerosol per lower until.
Some Important Points: Do not use above the waterline. Product temperature should be minimum 5°C/41°F and maximum 35°C/95°F. Ambient temperature should be minimum 5°C/41°F and maximum 35°C/95°F. Substrate temperature should be minimum 10°C/50°F and maximum 29°C/85°F.
Compatibility/Substrates: Primocon Aerosol should be applied to freshly sandblasted metal, metal that has been etched with Viny-Lux® Primewash 353/354 or previously painted surfaces. Do not use under vinyl based antifouling paints such as VC Offshore, Baltoplate or TBT based antifoulings such as Micron 33.
Number of Coats: 3-4 coats as needed - Use as an entire can of Primocon Aerosol per lower unit.
Recommended WFT per coat: No imperial value exists for TypicalThickness.WFTSpray mils wet
Application Methods: Aerosol can
A non-bleeding, anti-corrosive primer that provides an excellent barrier on underwater metal surfaces, reducing galvanic corrosion. Use on underwater metal areas including aluminum outdrives and outboards, stainless steel, bronze props and shafts prior to application of Trilux® Prop & Drive, Trilux 33 Aerosol or Trilux 33. Use at least one full can of primer per lower unit.
- Easy to use aerosol spray
- An excellent primer for antifouling paint over sanded fiberglass
- An anticorrosive primer for underwater metal surfaces (including hulls, running gear, and the lower units of outboards and I/O's)
- Reduce pitting of the metal from galvanic corrosion
- Size: 16oz Aerosol Spray Can
Interlux Primocon, 16 oz Aerosol, Gray Product Data Sheet
*This Item Ships From South Florida Click to See Estimated Transit Times
Based on 3 reviews subject to moderation
- For more information about the characteristics of the review control, the possibility of contacting the author of the review, the time frames for publication and retention of reviews, as well as the methods of deleting or modifying reviews, please check our Terms and Conditions.
- No consideration has been given in exchange for the reviews, with the exception of reviews marked ‘Incentivized & Verified’, for which the verification procedures are available from here.
- Names marked by an * have been pseudonymized as requested by the author.
Sort reviews
-
5/5Collected and verified by Verified Reviews
good service as expected
Review of , reflecting an experience on by John R.
Show commentsHide comments -
4/5Collected and verified by Verified Reviews
-
5/5Collected and verified by Verified Reviews
Easiest application and excellent reputation for quality.
Review of , reflecting an experience on by Anonymous A.
Show commentsHide comments
Related Products
Barnacle Blocker by Sea Hawk Paints
Barnacle Blocker is a zinc-free aerosol spray formulated for use on underwater metals including steel, cast iron, copper, bro.....
Interlux Trilux 33 Aerosol YBA063, Black
Trilux® 33 Aerosol black is the highest performance aerosol antifouling available. It has been formulated specifically for al.....
Interlux Trilux 33 Aerosol, White
Pending Trilux® 33 Aerosol is the highest-performance aerosol antifouling available. It has been formulated specifically for .....
Interlux Primocon Underwater Primer
Interlux Primocon Underwater Primer is an anti-corrosive primer for all underwater metal surfaces It will provide an excellen.....