Duralux Topside Marine Enamel, High Gloss, Gallon

A single package topside alkyd enamel for use on primed steel and metal, wood, aluminum, or fiberglass. Originally developed for pleasure and commercial boats, the properties of this marine enamel make it also ideal for onshore or offshore oilfield equipment, farm machinery, and plant maintenance operations. Duralux Marine Enamels withstand repeated washings, resists oil and gasoline, and hold up to the discoloration effects of harbor gases.

Available Colors:

White

Black

Navy Gray

Biloxi Blue

Tile Red

Unit Rig Gray

Signal Red

Haze Gray

Lafitte Green

Int. Orange

Alpine Green

Aquamarine

Cruiser Blue

Signal Yellow

National Blue

Signal Green

Gulf Blue

Product Details

Manufacturer:	Duralux Marine Paints
Product SKU:	DUR-7XXGL

Customer Reviews

by Steve Nicholson
_{Date Added: 09/24/2012}

Cheap and easy to use. Looks best when applied in thin coats and scratches when rough but easy to touch up as needed.

	PRODUCT DATA: Type: Alkyd Enamel Sheen: High Gloss *Package Viscosity @ 77 F: 68-72 Kreb Units Weight per Gallon (U.S.): 9.72 % Solids by Weight: 63% % Solids by Volume: 46% Recommended Dry Film Thickness: 1-1.5 Mils Method of Application: Brush, Roller or Spray Application Viscosity @ 77* F: 70 Kreb Units Theoretical Spreading Rate @ 1Mil DFT: 400-500 square feet per Gallon VOC: Maximum 3.8 # per Gallon Dry Time: To touch - 4 hours, Recoat - overnight Thinner/Cleaner: M650 Paint Thinner Reduction Ratio: None required, but if spraying use no more than 10 % Flash Point:** 100* F T.O.C. Duralux Marine Enamel MSDS

	DIRECTIONS FOR USE: SURFACE PREPARATION: The surface must be dry and free of grease, wax, dirt, or other foreign matter. Scrape off all loose paint and dull any gloss area with a light sanding or power brushing. Remove all dust with a cloth dampened with paint thinner and allow to dry. APPLICATION: Unpainted Surfaces: Wood - Prime with Duralux Yacht Primer M741, apply two coats of Duralux Marine Enamel. Steel: On clean, rust free steel, apply two coats of Duralux Zinc Chromate M739 apply two coats of Duralux Marine Enamel. Aluminum: Pretreat with suitable wash primer. Apply one coat of Duralux Zinc Chromate M739, Top with two full coats of Duralux Marine Enamel. Fiberglass: Wipe down with Acetone prior to sanding and after sanding. Top with two full coats of Duralux Marine Enamel. Painted Surfaces: Wood - Sand thoroughly, spot prime bare areas with Duralux Yacht Primer M741 Duralux Yacht Primer. Then apply two full coats of Duralux. Steel: Clean all bare areas to bright steel. Touch up with two coats of Duralux Zinc Chromate Primer M739. Top with two full coats of Duralux Marine Enamel. Aluminum: Touch up all bare areas with Duralux Zinc Chromate M739, top with two full coats of Duralux. Fiberglass: Wipe down with Acetone prior to sanding and after sanding. Top with two full coats of Duralux Enamel. THINNING: Duralux is made for use as it comes from the can. If thinning is desired, Use no more than one-half pint of Paint Thinner M650 per gallon. For spraying, use one-half pint to one pint per gallon. COVERAGE: On properly prepared surfaces, expect to cover from 400-500 square feet per. gallon. DRYING TIME: Four hours, hut slightly longer on damp or cold days. Allow 12-16 hours for thorough hardening before repainting. CLEAN UP: Clean equipment with M650 Paint Thinner.

Description

Reviews

Specifications

How To Use