Log In | My Account |    0 item(s), Total: $0
Advanced Search
Home ::  Fiberglass and Gel Coat Repair ::  Hawk Epoxy Resin System ::  Hawk Epoxy Resin, R1-S1, Quart
Categories
 


Specials & Promos

Enter your email to receive exclusive discounts!

Information

Follow Us On

Bottom Paint Store is upfront


Bottom Paint Store Coupons on tjoos.com
 
 
Hawk Epoxy Resin, R1-S1, Quart
0 of 5 Stars
Hawk Epoxy Resin, R1-S1, Quart
 
Size:
Quantity:
Price: $35.10
 
 
R1 Epoxy Resin - a smooth, low-viscosity liquid epoxy resin. With a variety of Hawk Epoxy Catalysts, it can be cured under a wide range of temperatures and environmental conditions to form a high-strength plastic with superior moisture barrier characteristics.
 
HAWK EPOXY Resin System is a 100% clear, low viscosity, low-blush system designed for ease of use in the widest variety of construction and repair projects. The flexibility of HAWK EPOXY lies in its huge range of CATALYST and FILLERS to adapt to any situation. If you need a fast cure due to schedule constraints or if you need a very thick fairing compound, HAWK EPOXY has the situation covered. After the application is cured, it can be sanded into fine tuned shape for the highest quality finish. With it’s ease of use, thin layer roll out capabilities and low blush, HAWK EPOXY is the easy choice for all epoxy resin projects.

HAWK EPOXY resin is available in two system sizes color coded on each label. Note: Mix ratios vary by catalyst. For optimal product utilization, be sure to choose the same System Size for both the R1 Epoxy Resin and Hawk Epoxy Catalyst.

Part#   Description                   Size
R1-S1  Epoxy Resin - 1 Quart Size 2

  • Compare to West System 105-A

Hawk Epoxy is a premium grade epoxy resin system manufactured by Sea Hawk Paints.



Product Details
Manufacturer: Sea Hawk Paints
Product SKU: SH-R1-S1
 


 
Preparation: Apply over clean, dry surfaces. Remove all grease, oil, wax, or other foreign material by solvent, such as, S-80 Wax N Grease Killer or detergent washing. (SSPC-SPI). Non-porous substrates must be sanded to create a rough surface for stronger bonding and adhesion. Remove all dust prior to application.
DISPENSING: Do not adjust ratio (R1 Epoxy Resin/Catalyst) to alter cure time. Use the exact mixing ratio as described on page 2 of this document or on the Catalyst Label. Ensure accurate measuring for maximum properties. Particular emphasis was placed in the overall strength and toughness of the cured system. Dispense into a clean, non-porous, straight-sided plastic or metal container. Foam and glass container are unsuitable.
Dispensing with Hawk Pumps: If using the calibrated 30-KT Hawk Pumps, the correct ratio will be dispensed by one pump push of Catalyst and one pump of R1 Resin to equal the correct ratio. See the 30-KT Hawk Pump Manual for more details.
MIXING: Stir R1 Epoxy Resin and desired Hawk Epoxy Catalyst well ensuring that all materials from sides and bottom of container are thoroughly mixed for one to two minutes. Then include any Hawk Epoxy Filler (F1 High Load Adhesive Filler, F2 Structural Adhesive Filler, F3 Light Density MicroFiber Filler, F4 Bridging Adhesive Filler, F5 Light Density Fairing Filler, F6 MicroSphere Fairing Filler) if desired depending on application. Allow for adequate ventilation.
Application Tip: Unless you plan on overcoating Hawk Epoxy (when color variations may not matter), use the same age Hawk Epoxy Catalyst on a particular project to ensure color consistency.
HEAT WARNING! Curing epoxy generates heat and should be mixed in a wide shallow container to increase the surface area of the mixture. Only combine R1 Hawk Epoxy Resin and Hawk Epoxy Catalyst in small batches to reduce to avoid excessive exothermic heat that could shorten the working time melting or igniting the container or flammable materials and damage the skin.
HIGHER TEMPERATURE WARNING: Hawk Epoxy R1 Epoxy Resin will cure faster in warmer temperatures. DO NOT alter mix ratio to compensate for temperature. Doing so could damage the cure and reduce the strength of the epoxy
LOWER TEMPERATURE WARNING: Extra cure time is required as ambient temperature decreases. Using R1 Epoxy Resin below 40°F (4°C) could damage the cure and reduce the strength of the epoxy. DO NOT alter mix ratio to compensate for temperature.
CLEANUP: Clean up R1 Hawk Epoxy Resin, and mixed epoxy resin and Hawk Epoxy Catalyst with S-80 Wax N Grease Killer, acetone, or MEK.
SPILL/LEAK: Use an inert absorbent to complete clean-up. This material reacts with oxidizing materials. Take up carefully to avoid heat and sparks.
STORAGE: Storage temperature: 40°-90°F (32°-4ºC). Keep containers sealed and in a well-ventilated area. Hawk Epoxy Catalysts, (C1 Ultra Slow Catalyst, C2 Slow Cure Catalyst, C3 Fast Cure Catalyst, and C5 Clear Finish Catalyst) will darken in color with extended storage times. However, this color change will in no way affect the physical characteristics of the finished project. Hawk Epoxy R1 Resin may thicken with extended storage times and may require thorough mixing before combining with Hawk Epoxy Catalysts. If R1 Hawk Epoxy Resin or a Hawk Epoxy Catalyst goes through extreme hot and cold temperatures, 32˚F or below, it may get hard and mineralized in appearance. The mineralization will in no way affect the physical characteristics of the finished product. To eliminate mineralization, heat product to no less than 110˚F for 1-2 hours. Hawk Epoxy components have an extended shelf life that will last for several years. After extended storage, be sure to mix a small amount of R1 Hawk Epoxy Resin and Hawk Epoxy Catalyst (at correct ratio) and ensure proper curing before proceeding to a larger scope project.
 
 
We Also Recommend:

Hawk Epoxy Size 1 Kit
Hawk Epoxy Size 1 Kit
Always Free Shipping
Build Your Hawk Epoxy Kit: When you are finished selecting the products for this kit, your kit will will contain the following Hawk Epoxy Products: On...
view more!
Hawk Epoxy Fast Cure Catalyst, C3-S1, .4 Pint
Hawk Epoxy Fast Cure Catalyst, C3-S1, .4 Pint Designed for use with HAWK EPOXY R1 Resin for construction and repairs with superior adhesion, strength, bonding, filling, and moisture barrier qualit...
view more!
Hawk Epoxy Resin, R1-S2, Gallon
Hawk Epoxy Resin, R1-S2, Gallon
Always Free Shipping
R1 Hawk Epoxy Resin is a smooth, low-viscosity liquid epoxy resin. With a variety of Hawk Epoxy Catalysts, it can be cured under a wide range of tempe...
view more!
Hawk Epoxy Clear Finish Catalyst, C5-S1, .66 Pint
Hawk Epoxy Clear Finish Catalyst, C5-S1, .66 Pint Designed for use with HAWK EPOXY R1 Resin for very clear fiberglass cloth and coating applications with exceptional moisture barrier characteristics. ...
view more!
Hawk Epoxy Slow Cure Catalyst, C2-S1, .4 Pint
Hawk Epoxy Slow Cure Catalyst, C2-S1, .4 Pint Designed for use with HAWK EPOXY R1 Resin for construction and repairs with superior adhesion, strength, bonding, filling, and moisture barrier qualit...
view more!
Hawk Epoxy Ultra Slow Catalyst, C1-S1, .4 Pint
Hawk Epoxy Ultra Slow Catalyst, C1-S1, .4 Pint Designed for use with HAWK EPOXY R1 Resin for construction and repairs with superior adhesion, strength, bonding, filling, and moisture barrier qualit...
view more!
Hawk Epoxy Pump Set, 30-KT
Hawk Epoxy Pump Set, 30-KT Hawk Epoxy Pump Set 30-KT is used with Hawk Epoxy R1 Resin and Hawk Epoxy Catalysts to administer the proper amount of Resin/ Catalyst ratio without t...
view more!
 
 
 
 
Copyright © 2014 BottomPaintStore.com. All rights reserved.
About Us   |   Contact Us   |   Wholesale Account   |   Shipping   |   Industry Links   |   No Sales Tax   |  Terms and Conditions   |   Shopping Cart   |   Site Map