Aqua Buff 1000-W Fast Cut Compound

Suggested Uses: To remove scratches and polish composite from patterns, plugs, masters, and product molds. Also to clean and remove scratches from Fibre-Reinforced-Plastic parts, metals, and painted surfaces.

Time: All time calculations are base on temperatures of 77°F, 25°C

Viscosity: 60,000 – 90,000 cps as measured on a Brookfield Viscometer Model RVF, Spindle #6 at 10 rpm

Weight per Gallon: 11.0 +/-0.3 lb/gal

Grit (particle) size in microns: 80% are less than 40 microns particle size; 10 % average 40 microns; 10% are greater than 40 microns

Click this link to view Product SDS

Click this link to view Product Technical Data Sheet

Application: Dab Aqua–Buff 1000 or 2000 on the surface using a brush or cloth (stick to a small area), and then use a spray bottle to mist the surface with water. Only use about a coin sized amount per square foot (about half the amount used for other compounds.) Immediately machine buff* with a clean, damp, compound pad. Use wool or wool/blend pads only.

*For best results, use machine buffers that generate at least 2500 rpm

Tools:
Wool Buffing Pad – a professional grade wool buffing pad will remove scratches without leaving swirl marks

Foam Polishing Pad – select a foam polishing pad to give the surface a professional shine

Cotton Buffing Pad – use a cotton buffing pad for a great polish

Misting Bottle – any spray bottle set to mist