Liquid Urethane Foam Kit, 4 LB Density
- $69.88
- Availability:In Stock
- Brand: FGCI
- Product Code: FGCI-liquidfoam4lb
Maximum service temperature of 180°F.
This 4 Lb. Foam meets Standard USCG Title 33, Chapter 1, Part 183.
How much will my pour foam expand? A 2 gallon kit of 4lb Foam will expand to 4 cubic Feet
Directions for General Small Quantity Use:
Step 1: Mix equal parts Base and Activator (1:1 by volume) or mix by weight (approx. 112 parts A-Side: Base to approx. 100 parts of B-Side: Activator).
Step 2: Mixing and metering equipment must accommodate the 1:1 by volume mix ratio.
Step 3: Mix thoroughly using a stir stick or a mechanical mixer.
Step 4: Pour immediately after mixing.
Step 5: Allow cooling between pouring.
Directions may vary by application.
Liquid Urethane Foam with a 4lb density is a two-component, Isocyanate/Polyol based, pour-in-place, urethane foam system available in three separate density formulations by weight per cubic foot. Our 4 Lb. Foam meets USCG Title 33, Chapter 1, Part 183. Perfect Boat Foam for Structural Applications! Polyurethane Mix / Pour Foam. COAST GUARD CERTIFIABLE AS FLOTATION FOAM. Resistant To Water Penetration (Can Be Used For Flotation And Insulation). A 2 gallon kit of 4lb Foam will expand to 4 cubic Feet. Common Applications: 4 LB density foam is suited well for most floation applications that require more support than the 2 LB offers. This foam is recommended to be used when supporting gas tanks and some deck areas. Choose this density if you feel that the foam will be required to withstand minor to moderate loads. This poly urethane foam is used for a variety of applications, including:
- A Rigid Closed Cell Foam Resistant To Water Absorption
- Marine or Boat Foam Kits
- Boat Structural Foam
- Floating Foam Kits
- Car Audo Foam Kits
- DIY Polyurethane Foam Insulation Kits
- Spray Foam Insulation Kits
- Art / Sculpting
- Taxidermy
- Prototyping
- Mold Making
- Decorative and Architectural Millwork Pieces
- Good compressive strength
- Excellent solvent resistance
- Mold and mildew resistance
*This Item Ships From Florida Click to See Estimated Transit Times
Based on 3 reviews subject to moderation
- For more information about the characteristics of the review control, the possibility of contacting the author of the review, the time frames for publication and retention of reviews, as well as the methods of deleting or modifying reviews, please check our Terms and Conditions.
- No consideration has been given in exchange for the reviews, with the exception of reviews marked ‘Incentivized & Verified’, for which the verification procedures are available from here.
- Names marked by an * have been pseudonymized as requested by the author.
Sort reviews
-
5/5Collected and verified by Verified Reviews
Worked as hoped.
Review of , reflecting an experience on by Anonymous A.
Show commentsHide comments -
5/5Collected and verified by Verified Reviews
Easy to use Thx
Review of , reflecting an experience on by Anonymous A.
Show commentsHide comments -
5/5Collected and verified by Verified Reviews
It some good stuff for boats
Review of , reflecting an experience on by Anonymous A.
Show commentsHide comments
Related Products
Liquid Urethane Foam Kit, 2 LB Density
Liquid Urethane Foam with a 2lb density is a two-component, Isocyanate/Polyol based, pour-in-place, urethane foam system avai.....
Liquid Urethane Foam Kit, 8 LB Density
Liquid Urethane Foam – Closed Cell Foam with a 8lb density is a two-component, Isocyanate/Polyol based, pour-in-place, u.....