Tag Archives: awlspar varnish

What Varnish to Choose?

Typically a varnish is what is used to protect wood that exposed to the elements for long periods of time (think teak wood on boats).

Here are the links to our varnish choices to check as well.

Captain Jacks Premium Varnish Captain Jack's Varnishhas been designed for the highest quality work, with outstanding results and durability. A combination of high quality pure phenolic modified tung oil provides excellent weathering performance and will enhance the richness and beauty of the wood with classic bright work appearance. BEST VALUE!

Awl-Spar Classic Spar Varnish (with reducer) is the highest quality classic spar varnish with state of the art ultraviolet inhibitors and absorbers used for brightwork protection against water and weather. It has excellent durability, and is fast dry, fast recoat for quick build up. For above waterline use only.

Cetol® Marine Gloss with Next Wave™ UV-absorbing technology is a durable clear gloss protective wood finish, developed as a topcoat for Cetol Marine, Cetol Marine Light and Cetol Marine Natural Teak.  Next Wave technology is the next generation of Cetol Marine from Sikkens with a unique UV-absorbing package, which is specialty resins and advanced UV absorbers that provide greater protection, durability and longevity.  Cetol Marine Gloss provides a high gloss, hard wearing, UV protection and an easy to clean finish.  It can be used where a gloss appearance is preferred on top of Cetol Marine, Cetol Marine Light and Cetol Marine Natural Teak.  Do not use on decks.

Marine Spar Varnish is a super clear, high gloss varnish for exterior and interior use on new or previously varnished surfaces subject to abuse from parching sun, fresh or salt water, severe weather conditions or abrasion. Formulated with an ultra violet screening agent, Marine Spar Varnish will hold its gloss on exterior surfaces far better than conventional varnishes. Excellent for use on boats doors, furniture, porches, bar tops, or any other surface where a durable clear gloss finish is desired.

Restoring and Maintaining Awlgrip and Awlcraft 2000 Paint

Over time contaminants can build up and cause the finish of your Awlgrip/Awlcraft 2000 paint to appear dull.  You can restore the gloss of a freshly painted boat and prevent the premature aging caused by contaminates by following these steps:

  • Wash your Awlgrip or Awlcraft surface with Awlwash mixed with water (1-2 capfuls in a bucket of water for washing) using soft, non-abrasive cloths and rinse well. Doing so on a regular basis (once per month) will help control dulling buildup.
  • Solvent cleaning of Awlgrip only: Awlprep and Awlprep Plus can be used to aid in removal of stains or markers and to soften or remove heavy build ups of grease and grime, or spray paint on the topcoat and toluene, lacquer thinner, M.E.K., acetone can be used as well.
  • Solvent cleaning of Awlcraft 2000 and Awlgrip HDT only: Awlprep or mild solvents (mineral spirits, xylene, kerosene and diesel fuel) should be used.

Awlgrip AWLwashIn both cases apply solvents with soft cloths and do not allow the chemicals to dry on surface, puddle or soak. Wash with Awlwash to prevent remaining solvent to attack paint. As always when working with solvents, test in an inconspicuous area first.

 Distilled white vinegar and hot water will aid in removing salt stains, always follow with Awlwash.

Protecting the Surface

awlgrip awlcareAwlcare can be applied to the surface like a wax to remove pollutants (such as diesel soot), protects the finish and leaves a glossy shine. Awlcare should be applied regularly to protect against pollutants. It can be removed with Awl-Prep Plus (Awlgrip only) when it’s time to repaint. What to avoid with Awlgrip and Awlcraft 2000:

  • Abrasives
  • Polishing compounds
  • Traditional waxes as they tend to break down rapidly, yellow and attract dirt
  • Acid based products such as teak or metal cleaners and strong solvents on Awlcraft 2000, Awlbrite Clear or Awlspar Varnish.
  • Trapped moisture from supplies as paint can blister or delaminate

AVOID:

  • Avoid Traditional Waxes
  • Awlgrip topcoat only: Regular applications of Awlcare will help temporarily seal and restore shine to painted surfaces that have become porous due to age or mistreatment, helping to maintain a satisfactory appearance until there is time to repaint.
  • Awlcraft 2000 and Awlgrip HDT: Awlcare Protective Polymer Sealer will help maintain the gloss on these finishes with regular applications, especially those which have been buffed or polished. Remember, Awlcare is only applied and buffed by hand. Never apply or buff Awlcare with a machine.
  • Avoid abrasive and polishing compounds
  • Avoid strong solvents (eg. lacquer thinner, M.E.K., acetone) to clean Awlcraft 2000, Awlgrip HDT, Awlbrite Clear or Awlspar varnish.