Webbing Solution is a clear liquid added to gelcoat to obtain spatter or cobweb effects. It is mixed with a gelcoat of one color and sprayed onto a contrasting colored surface.

Decorative effects produced by the webbing mixture will vary, and relate directly to techniques or gun adjustments. A fine hairline spider web pattern results from plenty of air and scanty material flow. Coarse and splotchy patterns are created by fuller material flow and decreased air volume. While our webbing solution is only tested with gelcoat, customers do use with paint achieving similar results.

The manufacturer suggests on the initial coat you add the wax and while gelcoat is still tacky before it comes to a full air cure, you apply the contrast color of webbing (which should have the wax added too).

If you are applying webbing over a fully cured gelcoat, sand with 150 grit, clean with acetone, and then apply the webbing.

Mix 2 parts gelcoat to 1 part webbing.
Mix proper amount MEK-P for the amount of gelcoat.
Shoot at 10 to 12 PSI.

Add to colored gelcoat to obtain desired webbing effect. Test in an inconspicuous area to determine satisfactory results