Pettit Marine Paint, was established back in 1923 and is a manufacturer of a variety of boat paint including marine coatings, antifouling boat bottom paint, varnish, and epoxies.
Hard Modified Epoxies – The active ingredient leaches out while the paint film stays mostly intact. Leaching Coppers lose performance as time goes by and must be repainted after dry storage.
Pettit Easypoxy is an advanced single-stage topside polyurethane and deck enamel. It has a superior high gloss finish and flows well when brush applied. Easypoxy’s innovative ultraviolet filters improve gloss retention and enhance polyurethane’s durability.
Captain’s Satin Sheen Varnish V-975 is widely esteemed for its reliability, multi-purpose application, fast-drying capability, and superior durability.
Ablatives – (Ultima and Hydrocoat Technology) Ablative polymers paints wear away with use exposing new biocides, both the biocides and the paint film disappear over time. Ablative Polymers can be used multi‐season and maintain a more steady performance throughout their useful life.
Pettit Black Widow Racing Antifouling is the slickest, fastest, ultra-smooth, burnishable racing finish available. Its powerful dual biocides provide multi-season protection in all waters. Black Widow is easily applied by roller, brush, or spray and is easily burnishable to a metallic “gun-metal” shine.
Hybrid – (Vivid Technology) Hybrid antifoulings offering hard paint that does not build up. Hybrid’s work by leaching out the biocides just as a Traditional Leaching Copper does, but once the biocides are gone, the paint film will break down exposing a new layer of biocide.
Trinidad HD, Multi-Season Hard Antifouling Paint provides excellent, long-lasting protection, even under the toughest antifouling conditions. Trinidad HD provides dependable in-water antifouling protection while meeting the 330 gram per liter VOC regulations.
Copper Free – Econea is a non-metal biocide that is extremely effective against hard-shelled fouling organisms including barnacles, hydroids, mussels, oysters, and tube worms.
Odyssey HD multi-season antifouling combines controlled polishing ablative technology with a high copper content to provide a paint film strong enough to handle the tough marine environment from coast to coast. Odyssey HD is compatible over most finishes, 50 state V.O.C. compliant, and will not build up over time leaving running surfaces smooth and clean.
White Copper -(Cuprous Thiocyanate)- requires 50% less copper content than the heavy, dark copper used in conventional antifouling paints. They are the only copper-based paints that are compatible with aluminum.
Low-Density Copper – replaces the core of traditional Cuprous Oxide with environmentally friendly materials found naturally in the ocean.
Irgarol – is used in many dual biocide products, Irgarol is an algicide designed for use in antifouling paints to prevent soft growth such as algae and grasses.
Water-Based (Hydrocoat Technology)- This formula uses water to replace the harsh solvents found in conventional antifouling paints. The product has an extremely low VOC content.
Clean Core Technology – An enhanced paint film that can reduce the amount of heavy metals released into our waters by up to 90%. These new additives have been specially formulated to provide a more “finetuned” and consistent release of the biocides from the paint film. This results in a more effective bottom paint that requires lower biocide levels to deliver full antifouling protection.