Restoring your weathered teak wood is an easy 3 step process using the JustTeak™ Teak Restoration Kits. Learn how to clean, brighten, and seal your teak or other wood. This simple teak restoration process can be used on an teak wood including teak furniture and teak decking.
Step 1 (Part 1). Cleaning Teak Wood with the JustTeak™ Teak Cleaner
Getting the teak clean is the first step in the process. You need a really effective cleaner that will not harm the wood. You should not use any bleach. All weathered teak should be first be cleaned with JustTeak™ Teak Cleaner.
1. Hose down entire areas thoroughly with fresh water. Ensure the teak does not dry during the cleaning process.
2. Applying the JustTeak™ Teak Cleaner with a soft polypropylene cleaning pad, gently scrub the product across the grain of the teak. The teak will tum dark brown and the cleaning pad will fill with dirt.
4. Apply to one area at a time then immediately rinse down entire area with water to remove the cleaner. Repeat if necessary.
Step 2. (Part 2) Using JustTeak™ Teak Brightener on Your Teak Deck
JustTeak™ Teak Brightener is the answer to dull, gray teak. Specifically designed to restore light beautiful look of new teaks.
– Brightens Teak Dulled by Weather and Wear
– Won’t Raise the Grain
– Contains No Bleach
– Cleans Away Discoloration in the Deck
1. Following the application of Part 1: JustTeak™ Teak Cleaner.
2. Hose down entire area with water.
3. Ensure the teak does not dry during the cleaning process.
4. Apply JustTeak™ Teak Brightener with a soft polypropylene cleaning pad, gently scrubbing across the grain of the teak. The teak will immediate lighten.
5. Apply to one area at a time then immediately rinse down entire area with water to remove the Teak Brightener. Repeat if necessary.
JustTeak™ Teak Oil Sealer is designed to seal and protect teak. Restores and protects teak and other woods. Easy to use and extra long lasting formula.
– Easy to Use
– Extra Long Lasting
– Restores and Protects Teaks and Other Woods
– Adds Luster and Beauty to Your Deck
1. For best results apply in temperatures above 10°C (50°F) on a sunny, low humidity day, ensuring the teak is dry. Shake vigorously prior to use. This product must be shaken periodically whilst using to ensure even colouring. Make sure the surface is completely dry prior to application.
2. Apply the JustTeak™ Teak Oil Sealer by either brush, pad applicator or rag. Take note to apply sealer along the length of the board to ensure even coating and avoid line marks.
3. Apply generously. Allow to dry, soak up any areas that may have not absorbed the sealer. When touch dry, apply 1-2 subsequent coats until the teak stops absorbing the sealer.
LOOKING AFTER YOUR SEALED TEAK Over time the sealer will start to lose its lustre and water beading capability. A fresh coat of JustTeak: Teak Sealer should be applied to restore the finish. For best results remove the Teak Sealer with JustTeak Cleaner and Brightener and re-apply.