Tag Archives: camo paints

Painting an Aluminum Hull with Non Antifouling Paint

When painting a boat used for hunting/fishing, such as a Jon Boat, typically a flat finish is desired so you’ll want to use one of our camouflage paints. A primer coat is used to help the paint adhere to the aluminum surface and provides an extra layer of protection from corrosion. You may also use  Aluma Hawk, which is a paint and primer in one.

The Aluminum Boat Paint Green or Aluma Hawk (available in Black, Jon Boat Green, Blue, Sand, White or Aluminum Grey), will serve as paint and primer in one so no need to purchase a primer! For more application details see our ‘how to paint an aluminum Jon Boat’ article. When using the Duralux Camouflage Paint on bare aluminum apply two coats of Duralux Zinc Chromate. These should be used when you desire a dull flat finish.

If you desire a gloss finish, look to the Mega Gloss by Blue Water, available in quarts and gallons, is affordable, easy to apply, and only recommended for above the waterline or moderate use on the bottom (1-3 days in the water, not extended periods). This topside paint works best in very thin coats and can be used on fiberglass, wood, aluminum, and steel; see the prep recommendations found on the product page on the “how to use” tab. The Mega Gloss Primer is recommended when applied to bare metal, if you have concerns about sealing your aluminum, see the Bottom Protect by Blue Water for a barrier coat. See here for more application tips.

You have many options when painting aluminum. Your use of the boat, the allotted budget, and the amount of time you want to spend on the project may help determine the right paint for you. For more information see our ‘topside boat paint options’.